Sinopak SSCT

Brand:Sinopak

Description:SSCT is a smart reactive power compensation device which uses SVG module to control TSC module; it perfectly combines the active module (SVG/APF) and the reactive module via smart control system, achieving continuous compensation without dead zone. It is an optimal solution to reactive power compensation and three-phase imbalance compensation. SSCT = Smart Controller +SVG modules +TSC modules

Origin:China Guangdong

Model:SPK-SSCT-XXXX-XX

MOQ:1 SetSets

Port:Shenzhen

Payment Terms:T/T

Packaging Details:Wooden case(Fumigation)

Product detail: SSCT

SSCT is a smart reactive power compensation device which uses SVG module to control TSC module; it perfectly combines the active module (SVG/APF) and the reactive module via smart control system, achieving continuous compensation without dead zone. It is an optimal solution to reactive power compensation and three-phase imbalance compensation.

SSCT = Smart Controller +SVG modules +TSC modules

Features
1.Modules design are easy to combine, expand and maintenance 
2.Pluggable design minimizes the outage rate of device. 
3.Fast response speed: compensate the power factor to 0.99 within 10ms
4.Multi-function compensation: able to compensate either capacitive reactive power or inductive reactive power, parts of system harmonics, three-phase imbalance, and voltage fluctuations caused by reactive power.
5.On-line detection and display of power quality parameters.
6.Free of switching oscillation and compensation dead zone
7.TSC module operation condition display. 
8.Smart control system and mixed compensation mode ensure that it will neither be overcompensated nor under compensated. 
9.Smart control system and mixed compensation mode reduces the switching times of the capacitor, prolonging the service life TSC.

Comparison with TSC
Traditional TSC reactive compensation may cause over or under-compensation, but in SSCT, TSCs can implement stepwise switching compensation; SVG modules can cover all dead zones and implement stepless switching to ensure a constant power factor.

Technical Specifications
Power supply voltage - 400 (±20%)V 
Power supply frequency - 50 (±10%)Hz 
Wiring mode - 3P4W
SVG Module - 50Kvar, 100Kvar 
TSC Module - 50Kvar/60Kvar 
Target Power factor - 0.99 
Compensation mode - Reactive compensation with specific harmonic 
Response time - less than 10ms 
Overload protection - Auto setting adjustment 
Split-phase compensation - 40%~100% 
Operation mode - Auto or Manual 
Display screen - 7Inch HMI 
Communication interface - Optional (RS485/Ethernet)
Protection level - IP20 (More higher protection level to be customized) 
Cooling mode - Forced air cooling 
Installation site - Indoor use 
Noise - <65dB(A)
Altitude - 1000m, if >1000m, the power decreases by 1% every 100m. 
Relative humidity - 5%~95%, non-condensing 
Dimension - 800*800*2200mm

For more product information, please feel free to contact Ashley by sending email to ashley.lin@sinopakelectric.com, skype:ashley.lin70