Click for original picture
Brand:junle
Description:Pressure controller is mainly used in the refrigeration system as a kind of control device to protect the system from too higher or lower pressure or it can be used for refrigeration units to control the cooling system start and stop through the system pressure. It also can be used for other industry fields which need control the pressure such as steam iron and reservoir, etc.
Origin:China Shanghai
Model:H20ps
Port:shanghai
Product detail:
Pressure controller is mainly used in the refrigeration system as a kind of control device to protect the system from too higher or lower pressure or it can be used for refrigeration units to control the cooling system start and stop through the system pressure. It also can be used for other industry fields which need control the pressure such as steam iron and reservoir, etc.
Certificates：
UL、VDE、CE、CQC PED
Technical parameters
| NO | ITEM | Technical Parameters | |
| Low pressure controller | High pressure controller | ||
| 1 | Contact Electrical Rating | AC250V，6A；AC125V，10A；DC28V，10A； | |
| 2 | Actuation Pressure (P) | 0.02 MPa＜P≤1MPa | 1MPa＜P≤5MPa |
| 3 | Max. Operation Pressure | 2MPa | 1.2 times of P |
| 4 | Proof Pressure | 2.5MPa | 1.5 times of P |
| 5 | Burst Pressure | 34.5MPa，1min，no breakdown or no leakage | |
| 6 | Ambient Temperature | -40℃ ～ +65℃ | -40℃ ～+100℃ |
| 7 | Fluid Temperature | -54℃ ～ +85℃ | -54℃ ～+135℃ |
| 8 | Contact Resistance | Less than 20mΩ( except the lead wire) | |
| 9 | Insulated Resistance | No less than 100MW (terminal to case)，no less than 10MW (after heat and humidity test) | |
| 10 | Dielectric Strength | AC1500V, 1min; AC1275V, 1min after heat and humidity test | |
| 11 | Salt spray test | All electrical performance meet the requirements after 96h; No severe corrosion of |
|
| 12 | Endurance | Automatic Reset: 100,000 cycles；Manual Reset: 10,000 cycles | |
