Brand:GLSUN
Description:1×N Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc.
Origin:China Guangxi
Model:SUN-FSW-1×N
MOQ:100Unit/Units
FOB:perUnit/Units1--500USD
Port:Guangzhou/Shenzhen
Payment Terms:T/T
Supply Ablility:20000Unit/Units
Supply Time:Month
Delivery Time:2016-10-31
Packaging Details:by carton box
Product detail:
INTRODUCTION:
1×N Optical Switch - Features |
|
•More Than 128 Channels •Low Loss and High Reliability •Parallel Interface (TTL) •Modularized Design •Epoxy-free on Optical Path |
|
1×N Optical Switch - Applications | |
•Ring Network •Remote Monitoring in Optical Network •Testing of Fiber, Optical Component |
|
1×N Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system. | |
1×N Optical Switch - Specifications |
Parameters |
Unit |
SUN-FSW-1×N |
|||
Insertion Loss |
dB |
1 < N ≤8 |
9 < N ≤16 |
17 < N ≤64 |
65 < N ≤128 |
Typ: 0.6 Max: 0.8 |
Typ: 0.8 Max: 1.0 |
Typ: 0.8 Max: 1.2 |
|||
WavelengthRange |
nm |
850±40 / 1300±40 |
1260 ~ 1650 |
||
Test Wavelength |
nm |
850 / 1300 |
1310 / 1550 |
||
Return Loss |
dB |
MM ≥ 30 SM ≥ 50 |
|||
Crosstalk |
dB |
MM ≥ 55 SM ≥ 70 |
|||
PDL |
dB |
≤ 0.05 |
≤ 0.1 |
||
WDL |
dB |
≤ 0.25 |
|||
TDL |
dB |
≤ 0.25 |
|||
Repeatability |
dB |
≤ ±0.02 |
≤ ±0.05 |
||
Durability |
Cycles |
≥ 10 Million |
|||
Switching Time |
ms |
≤ 10 (Sequence switch time of adjacent channel) |
|||
Optical Power |
mW |
≤500 |
|||
Operating Temperature |
℃ |
-20 ~ +70 |
|||
Storage Temperature |
℃ |
-40 ~ +85 |
|||
Relative Humidity |
% |
5 ~ 95 |
|||
Dimension |
mm |
135×64×32 (N≤16) |
150×80×32 (9≤N≤16) |
||
150×80×70 (17≤N≤64) |
150×150×70 (65≤N≤128) |
1×N Optical Switch - Pin Configurations DB-9 male connector |
Pin No. |
Signal Name |
I / O |
De |
1 |
D0 |
Input |
TTL, Channel selection bit 0 |
2 |
D1 |
Input |
TTL, Channel selection bit 1 |
3 |
D2 |
Input |
TTL, Channel selection bit 2 |
4 |
D3 |
Input |
TTL, Channel selection bit 3 |
5 |
/RESET |
Input |
TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
6 |
/READY |
Output |
TTL, Ready (High=Not ready, Low=Ready) |
7 |
ERROR |
Output |
TTL, Error (High=Error, Low=No error) |
8 |
GND |
Input |
Ground |
9 |
+5VDC |
Input |
5.0±5% VDC Power Supply (max 650mA) |
DB-15 male connector |
Pin No. |
Signal Name |
I / O |
De |
2 |
D0 |
Input |
TTL, Channel selection bit 0 |
3 |
D1 |
Input |
TTL, Channel selection bit 1 |
4 |
D2 |
Input |
TTL, Channel selection bit 2 |
5 |
D3 |
Input |
TTL, Channel selection bit 3 |
6 |
D4 |
Input |
TTL, Channel selection bit 4 |
11 |
/RESET |
Input |
TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
7 |
/READY |
Output |
TTL, Ready (High=Not ready, Low=Ready) |
8 |
ERROR |
Output |
TTL, Error (High=Error, Low=No error) |
1, 9 |
GND |
Input |
Ground |
15 |
+5VDC |
Input |
5.0±5% VDC Digital power supply (max 50mA) |
12 |
VM |
Input |
5.0±5% VDC Drive power supply (max 600mA) |
10, 13, 14 |
NA |
|
|
DB-25 male connector |
Pin No. |
Signal Name |
I / O |
De |
||
15 |
D0 |
Input |
TTL, Channel selection bit 0 |
||
16 |
D1 |
Input |
TTL, Channel selection bit 1 |
||
17 |
D2 |
Input |
TTL, Channel selection bit 2 |
||
18 |
D3 |
Input |
TTL, Channel selection bit 3 |
||
19 |
D4 |
Input |
TTL, Channel selection bit 4 |
||
20 |
D5 |
Input |
TTL, Channel selection bit 5 |
||
21 |
D6 |
Input |
TTL, Channel selection bit 6 |
||
22 |
/RESET |
Input |
TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
||
2 |
/READY |
Output |
TTL, Ready (High=Not ready, Low=Ready) |
||
3 |
ERROR |
Output |
TTL, Error (High=Error, Low=No error) |
||
1, 10, 14, 23 |
GND |
Input |
Ground |
||
12, 25 |
+5VDC |
Input |
5.0±5% VDC Digital power supply (max 50mA) |
||
13 |
VM |
Input |
5.0±5% VDC Drive power supply |
N≤64 |
Current supply ≤600mA |
11, 24 |
N≤128 |
Current supply ≤800mA |
|||
4, 5, 6, 7, 8, 9 |
NA |
|
|
Max Channel |
Input |
Active Channel |
|||||||
/RESET |
D6 |
D5 |
D4 |
D3 |
D2 |
D1 |
D0 |
||
N=16 |
0 |
x |
x |
x |
x |
x |
x |
x |
0 reset |
1 |
x |
x |
x |
0 |
0 |
0 |
0 |
COM → 1 |
|
x |
x |
x |
0 |
0 |
0 |
1 |
COM → 2 |
||
x |
x |
x |
0 |
0 |
1 |
0 |
COM → 3 |
||
x |
x |
x |
… |
… |
… |
… |
… |
||
x |
x |
x |
1 |
1 |
1 |
1 |
COM → 16 |
||
|
|||||||||
N=128 |
0 |
x |
x |
x |
x |
x |
x |
x |
0 reset |
1 |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
COM → 1 |
|
0 |
0 |
0 |
0 |
0 |
0 |
1 |
COM → 2 |
||
0 |
0 |
0 |
0 |
0 |
1 |
0 |
COM → 3 |
||
… |
… |
… |
… |
… |
… |
… |
… |
||
1 |
1 |
1 |
1 |
1 |
1 |
1 |
COM → 128 |
1×N Optical Switch - Optical Route |
1×N Optical Switch - Timing Diagram |
1×N Optical Switch - Dimension >02: 135×64×32-DB9 (N≤16, DB-9 male)
>23: 150×80×32 - DB15 (N≤16, DB-15 male)
>24: 150×80×70 -DB25 (17≤N≤64, DB-25 male) >26: 150×150×70 -DB25 (65≤N≤128, DB-25 male)
|
|
1×N Optical Switch - Ordering Information: SUN-FSW-1×N-A-B-C-D-E-F |
N |
A |
B |
C |
D |
E |
F |
Channel |
Fiber Type |
Test Wavelength |
Tube Type |
Fiber Length (Include connector) |
Connector |
Dimension |
1 ~ 128 |
SM: SM, 9/125 M5: MM, 50/125 M6: MM, 62.5/125 X: Others |
850: 850nm 1310: 1310nm 1550: 1550nm 1310/1550: 1310/1550nm X:Others |
90: 900um 20: 2.0mm X: Others |
05: 0.5m±5cm 10: 1.0m±5cm X: Others |
OO:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC LP: LC/PC LA: LC/APC X: Others |
02: 135×64×32-DB9 23: 150×80×32-DB15 24: 150×80×70-DB25 26: 150×150×70-DB25 X: Others |