Inverted Bucket Steam Trap

Brand:GOOLE,OEM

Description:Armstrong Inverted Bucket Steam Trap

Origin:China Zhejiang

Port:shanghai/ningbo

Payment Terms:T/T

Product detail: Pressure Rating: 1.6- 4.0Mpa

Specification: Screwed:DN15-50Material: cast steel
Standard flanges: DIN, ANSI, JIS, JB79
Standard screwed: NPT
 
Working Principle.

The design makes use of the working principle of difference in density of steam and condensate. The compound lever is connected to the inverted bucket inside the valve,working on steam pressure switch.The inverted bucket is a level sensor in the steam trap with opening downward.When the device starts up ,air and low-temperature condensate enter into the tube.At this time ,the trap is completely open,allowing quick discharge of air and low-temperature condensate and temperature rising. Steam entering into the inverted bucket causes it to float.and the lever arm drives the valve corce to close. A small vent in the bucket may automatically discharge the air.Some part of the steam will be discharged from the vent ,and other part of the steam will become condensate.The inverted bucket will sink without buoyant force, and then the lever arm will help the valve core to open the valve. When the valve is open, steam will get into the bucket again,causing the valve to close again. The device will work circularly and discharge water discontinuously.

Structural Characteristic. 

Inverted bucket type steam trap,as a mechanical steam trap, has outstanding performance and can be used low ,medium and high pressure.It applies stainless steel internal components and heat treatable steel base . It has such features as strong structure,resistance to abrasion and corrosion, long durability, and not easy to be damaged. It is highly recommended to be used for condensate recovery sustem for its steam saving capability, High heat engine efficiency, and anti-back pressure characteristic. The trap may be assembled with check valve so as to save piping space.
 
Correct conditions for choice of configurations when placing an order: 
The user may choose the discharge capacity of trap as per max. condensate which is equal to max. steam consumption of the machine by multiplying factor (2-3 times) . Max. operating differential pressure of trap( namely, working pressure before the valve minus the back pressure behind the valve.It shall be specified if there is any back pressure.Maximum working temperature of the trap ,Drainage operating mode ,Connecting model, Valve materials.
 
Material of Main Component.
 

Name of component	Material of component
Valve body, valve cover	WCB
Internal components	stainless steel

 
The table below shows the water discharge capacity of the inverted bucket type steam trap (KG/KR), When making a choice users should take 2-3 times safety factor into consideration.
 

Product model		880	881 881F 81	882 882F 82	883 883F 83	884 884F 84	815 815F 85	816 816F
	0.5	240	420	800	1520	2500	3960	7190
	1	280	470	930	1750	2950	4500	8600
	2	230	460	930	1800	3020	4500	8150
	4	280	410	920	2000	3050	4400	8800
	6	280	380	800	1560	2600	4600	8000
	8	310	420	900	1750	2950	4900	8850
	10	260	365	660	1550	2550	4500	8450
	12	200	380	720	1730	2880	4850	9000
	15	230	335	560	1500	2500	3000	8400
	17	250	350	600	1550	2600	3200	8650
	21	--	240	860	1200	2200	3400	7200
	25		250	900	1300	2400	2900	7800

Connecting Dimension (mm).
 880-885, side enter and side out,with filter screen, external dimension (mm):

	Model	DN	A	C	D	B	Maximum pressure kg/cm 2
	880	1/2 '' 3/4 ''	96	128	70	146	25
	881	1/2 '' 3/4 '' 1 ''	96	128	100	176	41
	882	3/4 '' 1 ''	145	170	137	231	25
	883	1 '' 1 1/4''	180	202	193	313	25
	884	1 1/4' 1 1/2''	203	232	212	362	25
	885	1 1/2'' 2 ''	220	250	248	396	25

 
881F-886F, Flange, with filter screen, external dimension (mm):
 

	Model	DN	A	C	D	B	Maximum pressure kg/cm 2
	881F	15. 20 .25	96	170	100	176	25
	882F	20 .25	145	210	137	131	41
	883F	25 .32	180	270	193	314	25
	884F	32 .40	203	320	212	362	25
	885F	40 .50	220	320	248	396	25
	886F	65 .80	265	400	310	799	25

 
81-86, From below enter to upper , external dimension (mm):
 

	Model	DN	A	B	Maximum pressure kg/cm 2
	81	1/2 ''	108	162	25
	82	3/4 '' 1	133	203	25
	83	1 ''	162	273	25
	84	1 1/4''	184	314	25
	85	1 1/2''	216	380	25
	86	2 ''	260	432	25

Our Services
Pre-sale service:
1.We have full stock and can deliver within short time.
2.OEM and ODM order are accepted, Any kind of logo printing or design are available.
3.Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.
4.All of our products are produced by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.   
After you choose:
1. We will count cheapest shipping cost and make invoice to you at once.
2. Check quality again, then send out to you at 1-2 working day after your payment
3. Email you the tracking no., and help to chase the parcels until it arrive you. 
After-sale service:
1.We are very glad that customers give us some suggestion for price and products.
2.If you have any question,please contact us freely by E-mail or Telephone.

Attn:Ellison Yue.

   

  

Tex:86-577-57789960.

Fax:86-577-57789962.
Mobile: +86-138-6862-9071.