Click for original picture
Brand:aa
Product detail:
Spec sheet of miniBluetooth Headset BT-H01
A Brief Introduction
Mini Bluetooth headset BT-H01is a newly designed high-class stereo Bluetooth headphone
BT-H01 has built-in ISSC BM81SPK01Bluetooth module, it integrates the Bluetooth 3.0+EDR function for a ultrahigh data transmission rate and distance (more than 10 meters); the built-in lithium polymer battery provides more than 10 hours’ working time; the headphone uses ABS/stainless steel as the main structure to make the headband stable, and with soft PU ear-muff to assure when wearing this headphone there is a comfortable feeling: all buttons designed with LED lights to show an easy way while operating;built-in high sensitive microphone for a cear talking.
BT-H01 brings a high quality music life, f ree your hands and let you enjoy the wireless communication.
B Outward Structure
Main materials: ABS / PP / PU / stainless steel / sponge / non-woven
Engineering drawing:
Item size: 195*200*70mm(L*W*H)
C Electrical Features
Bluetooth Version Bluetooth 3.0 + EDR
Bluetooth Name BT-H01
Standby Current ≤ 10μA
Working Current ≤ 30mA
Working Voltage DC 4.2 V
Charging Current DC 5V 500mA (red LED glints)
Speaker Unit φ40 32Ω 20mW *2
Frequency Response 20-20000Hz
Microphone 5.0*6.0mm omnidirectional;frequency 100-10000Hz; S.N.R≥60dB
Battery 300mAH 3.7V lithium polymer battery
Battery Life ≥ 300 times ( then the capacity goes down non-linearly)
Charging Time 3H (fully charge)
Standby Time ≥ 120H
Working Time ≥ 10H(in appropriate volume)
Working Distance ≥ 10M (in the open air)
D Operating
Button Definition:
multi-button power on/ power off/ activate Bluetooth/ phone answer/ phone hungup/ re-dial last call
Next button next music/ fast forward
Previous button previous music/ fast reverse
Volume up volume up
Volume down volume down
Operation:
First please activate your mobile phone Bluetooth function, and enter the searching mode.
Power on: press button for 3 seconds, the headphone will power on, you’ll see the red&blue LED glints 3 times.
Activate Bluetooth pairing: make sure the headphone is power off, then press button for 6 seconds, the headphone will enter the pairing mode; now you can find the headphone in your mobile phone by name “BT-H01”, please connect this headphone to the mobile phone by password “0000”; while pairing succeed please play the music and start the wireless enjoyment. * please note there are only 30 seconds for pairing, if you can’t connect the Bluetooth in 30 seconds please power off the headphone and re-try again.
Power off: press button for 6 seconds, the headphone will power off, you’ll see the red&bluetooh glints 3 times.
Select music: please use button to select next music, or continually press button to go fast forward; please use button to select previous music, or continually press button to go fast reverse.
Selet volume: please use button to turn the volume up; and please use button to turn the volume down
Phone answer/hangup: when phone call comes, please press button to answer the call; when phone call ended, please press button again to hangup the call; please note when phone call comes, continuously press on button 3 seconds will reject the call.
Last call re-dial: please press the button twice to re-dial last phone call
Charging: please use the attached USB cable to charge by computer USB port or other output 5V chargers.
Audio in: please use the attached audio cable to connect with other music players.
E QC Procedure
Project | Contents | Standards |
Main body | matching | Check all ABS shell joint correctly, no gaps on the main body. Each screw nail uniformly in right position. |
scratches | Check the product surface scratches under 40W fluorescent light | |
dirties | Check the product surface splotch, impurity, variedness, glue remains | |
silk printing | Check the printing LOGO , color , size , and clear enough | |
buttons | Press all buttons to feel if the feeling is nice, button back to position neatly | |
stickers | Check the sticker is in right position, sticker prints right, no reverse | |
package | Check all accessories are in the package, the package is clean | |
function | charging | Use DC power to charge the headphone, watch the LED glints right |
Speaker test | Input music and test the sound if has noise, or not balanced | |
Mike test | Record voice and replay it to check the voice is clear and no echo | |
Bluetooth test | Use Bluetooh PC to connect headphone if the connecting is smoothly | |
Compatibility test | Use 3 different brand mobilephone to connect headphone if the connection is smoothly |
F Reliability Test
Environmental testing | Heat resisting | Put in +60°C thermotank for 2 hours, then check if the main body deform or drop off, check if it can work normally |
Cold resisting | Put in -20°C thermotank for 2 hours, then check if the main body deform or drop off, check if it can work normally |
G Notes
Please use the headphone in appropriate condition(-20°C to +50°C)
Please don’t drop the headphone from high.
If you won’t use the headphone for a long time, please fully charge it and put it into where dry and cool, avoid sunshine.
Please charge the battery if:
(1)headphone power off automatically in many times
(2)headphone buttons can not work validly
Please do not disassemble the headphone.
* Please note : All technical specifications may be subject to variations WITHOUT notice.
H Accessories, Packages, and Photos
Accessories:
USB to Mini USB charging cable 1pc. 3.5mm audio cable 1pc. Portable bag 1pc.
One product collection:
Details:
