Linux Operating system dm 800 hd se digital receiver with wifi

(Satellite receiver Dreambox 800 hd se with  wifi , dm800 HD se

Main feature

  -400 MHz MIPS Processor
-Linux Operating System
-OLED-Display
-MPEG-2/ H.264 Hardware decoding
-Tuner: DVB-S, optional: DVB-C, DVB-T
-Tuner Module,Plug&Play
-1xSmartcard-Reader
-V.24/RS232 Interface
-10/100Mbit Ethernet Interface
-1xScart (RGB, FBAS or S-Video)
-HDMI
-2xUSB 2.0
-analog modem
-S/PDIF Interface for digital bit stream out (AC-3)
-64 MByte Flash, 256 MByte RAM
-SATA
-for use either as internal SATA HDD 2,5"
-or use for extern eSATA

-unlimited channel lists for TV/Radio
-channel-change time<1 second
-automatic service scan
-directly bouquet-lists
-EPG(electronic program guide)
-multiple LNB-Switching control (supports DiSEqC)
-OSD in many languages and skin-support
-Videotext Decoder
-extern 12V power supply

DBS-Tuner mit DVB-S2:

Frequency Range 950 ....2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ...45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10-31 Mbaud/s(8PSK), 10-30 Mbaud/s (QPSK)

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible, H.246
Video Formats 4:3/16:9
Letterbox for 4:3 TV-Device

Audio decoder:
Audiokompression MPEG-1&MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD> 60 dB (1 kHz)
Crosstalk< -65 dB
Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink

Ausgang Video:
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

Serielle Interface RS 232:
Typ RS232 bidirectional
Bitrate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function: Update of Firmware

Ethernet:
10/100 MBit compatible interface
Function: Update of Firmware

Analoge modem:
analoge modem for Internet connection

SATA Interface:
- for use either as internal HDD 2,5"or eSATA or internal 2,5" HDD

USB
2xUSB 2.0 Host

LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical< 14V no load,>11,5V at 400mA
LNB Voltage horizontal< 20V no load,> 17,3V at 400mA

Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC-Rotor Control

Power consumption:
<15W at 12V

External PSU
Input:110-240V AC / 50-60Hz / 0,6A
Output:12V =/ 3,0A
Physical specification:
Ambient Temperature +15°C...+35°C
Humidity< 80%
Size (W *D* H): 195 mm*140 mm*40 mm

images: