Click for original picture
Brand:aa
Product detail:
Dual 2x12dBi high power access point
Long Distance Wireless LAN Outdoor Integrated Solution/300Mpbs
Wireless LAN CPE Outdoor Application(all in one): 2 pcs of 12dBi Panel Antenna & Attached Plastic Housing + AP PCBA
Specification
1, Operates on 2.4 GHz frequency band including 11n mode 2T2R MIMO technology for enhanced throughput up to 300Mbps.
2, Backward compatible with legacy IEEE 802.11g, 802.11b (2.4GHz) standards
3, High power with integrated 12dBi antenna for extended coverage.
4, Configuration and management operated via Web browser with password protected access.
5, Firmware upgrade via HTTP.
6, Supports Gateway, Bridge, WISP mode for wireless networks.
7, Supports 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), WPA2 (AES with IEEE 802.1x)
8, Support NAT, SPI (Stateful Packet Inspection) for advanced firewall features
9, Compliant with IEEE 802.3 and IEEE 802.3u 10/100 Mbps
10, Supports WMM function to meet the multimedia data bandwidth requirement
11, Power supply by 12V, 1.25A / 1.5A PoE DC injector over Ethernet
12, Supports multiple ESSIDs with individual security settings
13, Multiple ESSIDs support VLAN tagging.
| Ethernet Connection | 2 RJ45 10/100 Mbps data port |
| Standard | IEEE 802.1d (Spanning Tree Protocol) |
| IEEE 802.11b (11 Mbps Wireless LAN) | |
| IEEE 802.11g (54 Mbps Wireless LAN) | |
| IEEE 802.11n Draft 2.0 (300 Mbps Wireless LAN) | |
| IEEE 802.1x (Network Access Control) | |
| IEEE 802.3 (10Base-T Ethernet) | |
| IEEE 802.3u (100Base-TX Fast Ethernet) | |
| Operation Modes | Gateway mode |
| Bridge mode | |
| WISP mode | |
| PoE Power Adapter | 12V/DC /1.25A/1.5A |
| External PoE Injector | IEEE 802.3 (Ethernet) |
| Mounting | Hose Clamp |
| Enclosure | WeatherProof Enclosure |
| Integrated Antenna | Two 12dBi Panel Antenna |
| Radio | IEEE 802.11b/g/n |
| Temperature | 0 - 50°C |
| Humidity | 10 - 95% RH, non-condensing |
| Radome Material | ABS, UV resistant |
| Dimension | 259 x 215 x 98 mm |
| Lighting Protection | PoE surge protector (option) |
| Warranty | 1 Year |
| Manual | Manual CD |
| Frequency Range | 2.400 GHz - 2.483 GHz |
| Modulation technologies | 802.11b: Direct sequence Spread Spectrum (DSSS): DBPSK, DQPSK, CCK |
| 802.11g : Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM | |
| 802.11n: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM, 64QAM | |
| Security | WEP encryption (64/128 bit) |
| WPA TKIP | |
| WPA2 AES | |
| WPA2 mixed | |
| WPA RADIUS | |
| 802.1x Authentication | |
| Internal MD5/PEAP RADIUS server | |
| Client access control through media access control (MAC) filter | |
| Data Rate | IEEE 802.11b (11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps) |
| IEEE 802.11g (54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, 6 Mbps) | |
| IEEE 802.11n (MCS0-15: up to 300 Mbps) | |
| Transmit Power | OFDM: 23 dBm +/- 1.5 dBm (300 Mbps, 40 mW max.) |
| OFDM: 23 dBm +/- 1.5 dBm (54 Mbps, 40 mW max.) | |
| CCK: 28 dBm +/- 1 dBm (11 Mbps, 63 mW max.) | |
| Receiver Sensitivity | 11n (300 Mbps) MCS0-15: -73 dBm; 11g (54 Mbps) OFDM: -73 dBm |
| 11b (11 Mbps) CCK: -91 dBm |
Dual 12dBi Antenna
| Frequency Range | 2400 ~ 2500 MHz |
| Gain | 11n-g / 12dBi * 2 |
| VSWR | 2.0 : 1 Max. |
| Impedance | 50 Ohms |
| Polarization | Linear Vertical |
| HPBW/ Horizontal | 25 |
| HPBW/ Vertical | 25 |
| Front Back Ratio | 12dB |
| Power Handling | 2 Watts ( CW ) |
| Survival Wind Speed | 216 Km/ Hr |
Package
| - Wireless CPE CPE2624 |
| -User manual on CD,quick install guide |
| - Power adapter 12V 1.25A / 1.5A |
| - PoE DC Injector |
| - Mounting kit |
