high quality heat transfer printing paper to transfer for light t-shirts

Suitable for transferring to black & white or color images onto black or dark cotton, using an iron.
What you need:
-Dark fabric transfer paper
-Inkjet printer
-A flat, hard and smooth surface to iron on
-An iron (no travel iron)
-Greaseproof paper (attached one sheet for every five sheets of Dark Fabric Transfer paper)
-Black or dark T-shirt, cotton napkins or handkerchiefs, etc.

Steps:
1. Printing
-Store dark fabric transfer paper in its original packaging in a cool, dry place
-Print the desired motif onto regular photo copy paper to check that the color and size are correct
-Only print onto the unprinted, coated side of the transfer film. Select normal mode and not mirror mode
on your printer.
-Use the single-sheet feeding only for each time
-Printer settings: Select ‘Photo’ in ‘Quality selection menu’; Normal paper mode
-Before transferring, leave the printer image to dry for approx.5 minutes.
- Cut out the motif without leaving a margin around the edges.
- Straight after peel off the transfer film the base paper (liner)
2. Transferring
-Preheat the iron to the setting of highest temperature (about 180 degree) and take approx.2minutes.Do
not use steam function.
-You can also use a transfer heat press machine. (temperature about 175 degree )
-Briefly iron the fabric to ensure that it is completely smooth.
-Place the transfer film onto the textile with the printed image facing upwards.
-Cover the transfer film with the greaseproof paper.
-Iron the transfer film applying less pressure. Warm up the transfer evenly with slow circling movements
from edge to edge and make sure that the heat is evenly transferred over the entire area. Don’t forget the
corners and edges.
-Iron for max 2 minutes for motif on A4 sheet. For smaller motif iron shorter.
-Allow the transfer to cool at least 10 seconds, and then peel off the greaseproof paper in a smooth, even
movement.
-It’s possible to use the same greaseproof paper several times, if there are no inks left on it.
3. Washing
-Wait 24 hours before washing on the first time (drying time)
-Fabrics bearing our transfers are machine-washable up to 30 degree. Always wash garments inside out.
-Do not use aggressive washing detergents or bleach of any kind, do not tumble dry.
-Avoid ironing directly over the transferred motif, ironing form the backside of garment/fabric.
-To revitalize the color brilliance the transfer can be ironed again. Cover the picture again with the
greaseproof paper, iron for a few seconds and peel the greaseproof paper off after cooling.