Click for original picture
Legal status confirmed
Brand:aa
Product detail:
AC DC OEM Hydraulic power pack unit factory
Professional manufacture with good service!
Manual Hand Lowering Valve
Code | LP1A(B) | LP2A(B) | LP3A(B) | LP4A(B) | LP5A(B) | LP6A(B) | LP7A(B) | |
Volume | Gallon | .50 | 1.0 | 1.5 | 2 | 2.5 | 3.0 | 4.0 |
| Liter | 1.89 | 3.78 | 5.68 | 7.57 | 9.46 | 11.36 | 15.14 |
| ||||||||
Dim "L" | Inch | 7.48" | 10.63" | 13.58" | 16.34" | 19.50" | 22.64" | 28.95" |
| mm | 190 | 270 | 345 | 415 | 495 | 575 | 735 |
Dim "W" | Inch | 2.72" | 5.90" | 8.86" | 11.6" | 14.76" | 17.91" | 24.21" |
| mm | 70 | 150 | 225 | 295 | 375 | 455 | 615 |
OUR HISTORY:
We are established in 1985year,our company holds the business tenet of 'talents as motivation ,technology as basis,management for benefits and quality for market',with the quality principle of 'satisfying and exceeding clinets' requirements'and enterprise spirit of 'working hard,competition,unity&corporation,dedication'.with abundant production experience,advanced business tenet,standard management system and high technology,our company is a specializing designer and manufacturer of hydraulic power unit and hydraulic pressure cyliner of varieties of specifications.
Welcome you visit our factory,we can design the product based on your drawing.
Or call me;008615966901802
| Can match switching valve, realize two lifting. | ||||||||||||
| S control methods | ||||||||||||
| Products factory test already setting system pressure, generally for 6 - mpa. Such as the need to raise pressure, but will overflow valve cap screw off; According to clockwise turn adjusting screw. Every rotary 45 °, pressure increased about 1.2 MPa. On the other hand, the lower pressure. | ||||||||||||
| This product rate of descent can be made of throttle control. Control methods: unscrew throttle valve and nut, rotate throttle valve core. (clockwise to slow, and for quick) when debugging each rotation about 15 ° is advisable. Adjust the end, should and nut to and tight, and prevent and tight process throttle valve core and turn. | ||||||||||||
| S attention | ||||||||||||
| Three-phase power supply system, the motor after connection should be inching check motor steering is correct. | ||||||||||||
| This power unit not continuous operation, the requirement on 1 minute, should stop nine minutes; Cooling rear can repeat operation. If users need to work continuously; When you place an order shall be indicated. | ||||||||||||
| Clean the hydraulic oil should be used; Viscosity is 15-68 CST, recommend using N46 hydraulic oil. | ||||||||||||
| First start running system shall be immediately check the oil tank is enough. | ||||||||||||
| The first 100 hours after the operation system should be replaced hydraulic oil, every 3000 hours after changing a hydraulic oil. | ||||||||||||
| The product is suitable for use in according to the vertical loading, tank next. | ||||||||||||
| In order to ensure the normal operation of pump, prevent dirt of intrusion and damage, prolong service life. Must be regularly clean or replace filter. | ||||||||||||
| To ensure the personal safety, the motor must ensure reliable protective earthing. | ||||||||||||
| Use 220 v voltage of the power unit, should be made voltage regulator. To ensure the machine and the related electrical element not because owe voltage and damage. | ||||||||||||
| For the protection of pump motors and electrical components, should avoid frequent inching this system | ||||||||||||
workshop:
below is our factory pic.for your ref:
SHOWROOM:
delivery :
welcome you visit our factory,and if you have any urgent question,pls call me.008615966901802
