Click for original picture
Legal status confirmed
Brand:aa
Product detail:
You Benefit Main characties of gear box :
1. High modularization design: may equip with various motor or other power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type.
2. Transmission ratio: fine division, wide scope. The combined machine type may form very large transmission ratio, i.e. output very low rotary speed.
3. High strength, compact structure: the box body is made of high strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
4. Long life: Under the condition of correct type chosen (including choosing suitable operation parameters) normal operation and maintenance, the life of main parts of speed reducer (except wearing parts) should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
5. Low noise: because main parts of speed reducer are processed, assembled and tested critically, therefore the noise of speed reducer is low.
6. May bear larger radial load.
7. It may bear the axial load that is not more than 15% of radial force.
1. Conveyor gearbox Introduction:
GS serial is one kind of helical reducer, output shafts of GS series are vertical to input shafts. Units of GS series consist of single stage helical gears and single stage worm gears.
1) Type GS: Foot mounted helical worm gear units with solid shaft.
2) Type GSF: B5 flange mounted helical worm gear units with solid shaft.
3) Type GSA: Helical worm gear units with hollow shaft.
4) Type GSAF: B5 flange mounted helical worm gear units with hollow shaft.
5) Type GSAZ: B14 flange mounted helical geared motor with extended bearing housing.
6) Type GSH:Helical-worm geared motor with hollow shaft and shrink disk.
7) Type GSHF: B5 flange-mounted helical-worm geared motor with hollow shaft and shrink disk.
8) Type GSHZ: B14 flange-mounted helical-worm geared motor with hollow shaft and shrink disk.
9) Type GSAT/GSHT: Torque-arm-mounted helical-worm gear units with hollow shaft.
10) Type GS..SZ..AD..: Shaft input helical-worm gar units.
11) Type GS..R: Combined types of series GS and series GR.
2. Internalstructure of gearbox
3.Main datas of gear reducer, pls kindly see below:
Type | Model | Ratio | Output speed (RPM) | Nominal Power (KW) | Nominal Torque(N.m) | Output Design |
GS series Helical-worm geared motors | GS37-GS100 | 4.3-37500 | 0.04-349 | 0.12-22 | Top to 6500 | Foot mounted with solid shaft |
GSAF37-GSAF100 | Flange mounted with hollow shaft | |||||
GSAT37-GSAT100 | Hollow shaft with torque arm |
4. Process Flow:
5. First Rate Equipment:
1>Guomao gear grinding workshop equipped with German Niles gear grinding machines.
2>Performance testing bench for large whole-set gear cases.
3>German P26 gear tester
4>Coordinate measuring machine
6. Packaged Goods Ready to Dispatch:
Standard exporting package. our packaging is we have a polythene liner bag enclosing the gearbox (which is moisture barrier, rust-proof). And also, we put polyurethane foam around the gearbox (for avoiding hit and shock). Then put it into a veneer case.
Our company and factory
