2013 New Design CG430 Brush Cutter

Brand:aa

Product detail:

Advantage of CG430 Brush Cutter :

1, Brush cutter harvesting clean, laying neatly Article Shop or stacked.
2, Harvest Never again hunched over, and the men and women of labor can be used.
3, Brush cutter is adapted to the size of the plots and mud Tian plains, hills, terraced, triangle, etc.;
4, Brush cutter is easy to operate, and easy maintenance.

Details of CG430 Brush Cutter : 

 

Multiple Choice of CG430 Brush Cutter :

a. pipe: length (1.65m/1.25m, ect also can be chosen), material (stainless steel/ aluminum)
b. blade: nylon type/ straight/3T/4T/8T/30T, etc
c. engine: 1E34F/T200/1E36F/1E40F-5/139F/GX35, etc. can be matched as you need
d. type: side hang/ backpack
e. packing can be made as your requirements

 

Specification of CG430 Brush Cutter :

Engine model	1E40F-5
Engine type	Forced air cooling, 2-Stroke, Single cylinder
Displacement	43CC
Engine power	1.45KW/7000r/min
Fuel tank capacity	1200ml
Type	Side attached type
Carburetor type	Diaphragm
Fuel ratio	gasoline/2-cycle oil mixing ratio: 25:1
Packing size	42X32X31CM
Engine packing	360*300*240mm
Shaft packing	1640*120*100mm

 

Application of CG430 Brush Cutter :

 

Package of CG430 Brush Cutter : 

Notes of CG430 Brush Cutter :

In order to ensure the smooth of brush cutter during the use, you need to master a number of

points to note. The following seven points to keep in mind:

1, Familiar with the operation, carefully read brush cutter manual to know in case of an

emergency, shut down the engine in a timely manner.

2, Before using, carefully check all parts of the blade and the brush cutter is securely

connected. To replace the old and damaged blade or screw sets, in order to avoid the machine

is not running smoothly.

3, Only outdoors before starting the engine to add fuel.

4, Do not artificially adjust the governor, the engine speed is too high.

5. Should work slowly push mower to move forward, speed is not too fast.

6. Sloping mowing, not to high and sometimes low. Turn on sloping land, we must be especially

careful. Do not mow grass on steep slopes.

7, Set mower grass box, set grass box is not installed, do not use the mower.

Daily Maintenance of CG430 Brush Cutter :

(1) The maintenance of the oil.

Each time before using the lawn mower should check the oil surface, to see whether it is in the

middle of the oil gauge.

(2) Lawn mower air filter maintenance

Before every use and after use to check whether dirty.

(3) Maintenance mower carburetor and oil line

Add gasoline every call should filter filtration, and can not be put in the tank for a long time,

applications carburetor cleaner carburetor cleaner, carburetor dirty degree cleaning cycle. 

We Promise: 

1. Technical guidance (24 hours online tradmanager, skype, mobile).

2. Loading inform (loading port, destination port, shipping date, CBM, weight etc.)

3. Within warranty period, we will provide free parts for replacement if any problem belongs to us.

(delivery cost paid by customer).

4. After the warranty period the parts are offered at cost price

5. If you need the on-site show, welcome to our factory.

Related Models Of CG430 Brush Cutter :

Item No.	Engine model	Displacement	Blade	Type
GX35	GX35	35.8cc	Nylon cutter or metal blade	Knapsack or Side attached
431	139F	31cc	Nylon cutter or metal blade	Knapsack or Side attached
411	1E40F-6	40.2cc	Nylon cutter or metal blade	Knapsack or Side attached
328	1E36F	30.5cc	Nylon cutter or metal blade	Knapsack or Side attached
430	1E40F-5	42.7cc	Nylon cutter or metal blade	Knapsack or Side attached
330	1E36F-2	32.6cc	Nylon cutter or metal blade	Knapsack or Side attached
400	T200	40cc	Nylon cutter or metal blade	Side attached
520	1E44F-2	51.7cc	Nylon cutter or metal blade	Side attached

 

 

 

Looking forward to your inquiry!