BG431A Brush Cutter With Wheels

Brand:aa

Product detail:

Advantage of BG431A Brush Cutter With Wheels:

1, Brush cutter harvesting clean, laying neatly Article Shop or stacked.
2, Harvest Never again hunched over, and the men and women of labor can be used.
3, Brush cutter is adapted to the size of the plots and mud Tian plains, hills, terraced, triangle, etc.;
4, Brush cutter is easy to operate, and easy maintenance.

 

Details of BG431A Brush Cutter With Wheels:

 

Specification of BG431A Brush Cutter With Wheels:

Engine model	139F
Engine type	single cylinder, 4-stroke, air-cooled
Displacement	31cc
Rated power	0.8kw
Rated speed	7000rpm
Start system	recoil
Ignition system type	non-contact transistorized
Fuel	93# gasoline
Machine oil	four stroke special machine oil
Fuel tank capacity	900ml
Fuel oil consumption ratio	340 g/kw.h
Type	backpack
Rotate speed	200-3400 r/min
Drive transfer style	automatic centrifugation
Rotating direct of blade	anticlockwise
Blades	nylon cutting rope head , 2 teeth ,.3 teeth, 4teeth,8teeth, 40teeth, 80teeth
Max. cutter width	40mm
Engine carton	34*34*45cm
Shaft carton	168*15*12cm
G.W	11KG

 

Application of BG431A Brush Cutter With Wheels:

 

Package of BG431A Brush Cutter With Wheels: 

 

Notes of BG431A Brush Cutter With Wheels:

In order to ensure the smooth of brush cutter during the use, you need to master a number of points to note.

The following seven points to keep in mind:

1, Familiar with the operation, carefully read brush cutter manual to know in case of an emergency, shut down

the engine in a timely manner.

2, Before using, carefully check all parts of the blade and the brush cutter is securely connected. To replace the

old and damaged blade or screw sets, in order to avoid the machine is not running smoothly.

3, Only outdoors before starting the engine to add fuel.

4, Do not artificially adjust the governor, the engine speed is too high.

5. Should work slowly push mower to move forward, speed is not too fast.

6. Sloping mowing, not to high and sometimes low. Turn on sloping land, we must be especially careful. Do not

mow grass on steep slopes.

7, Set mower grass box, set grass box is not installed, do not use the mower.

 

Daily Maintenance of BG431A Brush Cutter With Wheels:

 (1) The maintenance of the oil.

Each time before using the lawn mower should check the oil surface, to see whether it is in the middle of the oil

gauge.

(2) Lawn mower air filter maintenance

Before every use and after use to check whether dirty.

(3) Maintenance mower carburetor and oil line

Add gasoline every call should filter filtration, and can not be put in the tank for a long time, applications

carburetor cleaner carburetor cleaner, carburetor dirty degree cleaning cycle. 

 

We Promise: 

 1. Technical guidance (24 hours online tradmanager, skype, mobile).

2. Loading inform (loading port, destination port, shipping date, CBM, weight etc.)

3. Within warranty period, we will provide free parts for replacement if any problem belongs to us.(delivery cost paid by customer).

4. After the warranty period the parts are offered at cost price

5. If you need the on-site show, welcome to our factory.

 

Related Models Of BG431A Brush Cutter With Wheels:

Item No.	Engine model	Displacement	Blade	Type
GX35	GX35	35.8cc	Nylon cutter or metal blade	Knapsack or Side attached
431	139F	31cc	Nylon cutter or metal blade	Knapsack or Side attached
411	1E40F-6	40.2cc	Nylon cutter or metal blade	Knapsack or Side attached
328	1E36F	30.5cc	Nylon cutter or metal blade	Knapsack or Side attached
430	1E40F-5	42.7cc	Nylon cutter or metal blade	Knapsack or Side attached
330	1E36F-2	32.6cc	Nylon cutter or metal blade	Knapsack or Side attached
400	T200	40cc	Nylon cutter or metal blade	Side attached
520	1E44F-2	51.7cc	Nylon cutter or metal blade	Side attached

 

 

 

Looking forward to your inquiry!