Click for original picture
Brand:aa
Product detail:
Copper Wire Recycling Machine
Introduction:
This Copper Wire Recycling Machine is designed to recycle copper or aluminum wire and cable scraps, like automobile wires, tele-communication wires, and other kinds of cables, by grinding them and dry-separating copper or aluminum granules from plastic or rubber.
Separation methods of copper wire crusher
Dry-type copper wire recycling machine: this machine adopts a separation method without adding water during separating and selecting process. And this machine uses the machine with an environment-friendly separation method, such as air flow separator, air shaking table or electrostatic separator. The main technological process
is: Crushing-air flow separating and selecting-( electrostatic separation ) - dust collection.
Features:
1. Diameter Range of Wires Processed: ≤20mm.
2. Purity of Granules: 99%.
3. Mounted on common steel base for easy portability. Easy to move, place and install.
4. A choice of screen sizes (granule size) depending on material.
5. Small dimensions with low power requirements.
6. Easy and rapid maintenance.
Main equipments and functions:
(1) No.1 cutting machine, it needs the operator to put the waste wires into machine. Although this step must be operated manually, it has the features like easy to operate and high output.
(2) Magnetic conveyer: it moves the waste wire from No.1 cutting machine to No.2 machine, and the magnet is equipped at the top of the it; when the No.2 pulverizer is full, the conveyer will stop working till the No.2 machine gets right.
(3) No.2 pulverizer: it is a device which is used for crushing the 2~3cm wire from No.1 pulverizer. This machine can crush the foreign body on external surface and separate the external rubber with copper completely. Additionally, the filtering network fixed at the bottom of machine is used for controlling the processing speed and output for different wires, and it is suitable for processing the cable from thinner one like hair to thicker one like power cable when it change the filter network. The pulverizing chamber can be operated by oil pressure system, what is more, it is easier to repair and change the blade.
(4) Blower- move the crushed materials from No.2 pulverizer to sorter by wind wave and pressure.
(5) Sorter—as a core part, it is used to separate the copper and external rubber, though the structure is complex, it is easy to operate.
(6) Cloth dust collector—this device is used for collecting the dust produced in sorter through blower, there are 12 filtration woven belts whose material is imported diffusing tissue which can recycle the dust effectively, and so guarantee the cleanliness of the air of surrounding environment .
(7) Air rock (Rotary valve)—Lie in the lower extreme of dust collector, for discharging the inside dust effectively, operate the rotary valve termly.
(8) Screw conveyer—the dust in dust collector is recycled by rotary valve and discharged outside.
(9) Control cabinet—as a control device, it is used for adjusting all the machines and equipped with emergency stop and timing function. The working principle is using the PLC to control each part of the machine with strong controllability.
Parameters:
Please send your inquiry with details such as cable type,diameter,insulation thickness and so on in advance to help facilitate your request.
