Xinxiang JinZhen Waste Plastic Oil Refining Machine

Brand:aa

Product detail:

Xinxiang JinZhen 2012 Used Plastic Pyrolysis Oil Refining  Machine

Facility  Of  Flow  Chart

 

.

Feed the reactor with raw materials through the feeding door by labor or machine and then close it tightly. Heat the reactor with coal, wood or other fuels. Some harmful smoke will come out along with the heating, but it can be removed by the desulfurization deduster, the water film cyclone and the bag deduster. The smoke form the exhaust disposal system is no different from the air. The draft fan helps to inhale the smoke from the pipe and then release it into the sky more quickly.

The oil gas will travel from the reactor to the gas separate, in which the heavy oil and impurities will depart from the gas due to the gravity. Then the gas will continue its journey into the depositing tank for a second separation. After that , the cleaned oil gas will run into the cooling condensing pipes in the cooling pool, where the gas will convert to liquid, the oil, and then flow into the oil tank for storage.

There will be some waste gas in the oil tank. It will follow the pipe over the oil tank into the cooling pool for a second condensing so that the remained oil gas could turn to oil to improve the oil yield rate. As for the waste gas, that cannot transform to liquid will go to the water seal and then to the furnace for burning. It is not only environment protection but also energy conservation.

  

Jinzhen Brand Waste Plastic Oil Refining Machine

1.high oil yield rate

2.unique exhaust removal system

3.large cooling pool

 

 

Oil yied/day	Waste tire/ rubber	Big tyres	45%--50%
		Car tyres	40%
		Bicycles and motorcycles tyres	30%--35%
	Waste plastic	Fishing net Safety net , farm-oriented film	45%--50%
		Conwenient bags , weave bags	40%
		Off –cut of recycled paper mill	20%--30%

condensing system

1,the "S" shape extends the condensing area, about 37.2m                  

2,the open pool makes natural cooling aviable, which is safty and energy conservation

3,cooling down quickly with the pipeline diameter of 219mm and length of 6m                                                

4,the elbows make it easier and convenient to clean and maintain                  

5,just need to make up the vaporated water, it's water conservation                                6,condensing tower and other cooling equipments can be added based on the customers' requirements  

 

exhaust disposal system

1,the smoke from which is colorless and smelless, no different from the air, environment friendly

 

2,unique design  inside the bag dedusting  

                          

 

3. Company Commitment:

The company pledge that each kind of series equipment we sell have the consummation the post-sale service, a warranty period year, that thoroughly settle down customer extra worries.

 

Security

The main equipment is of high safety. The phase of the unliquefizable waste gas produced during the process is alkyl from C1to C4, which is dangerous when burning directly. In our process, it is transferred first through a water close device and a safety device- burning air muzzle. Before burning, we should ensure the safety of production.

 

Environmental Protective

Dispose waste gas, liquid, and residua in the process:

  1. Waste gas: Transferred through two safety device: water close &burning air nozzle. Fully burnt, not only eliminated pollutant but also minimized the quantity of fuels. For smoke dust discharge, we apply series machines of patent in our company Desulphurization and dust remover which could control the smoke dust discharge amount meet relative standards of GB-2001.

   2. Waste liquid: Produced waste acidic water in the process of oil disposing (50kg process from 1 ton of oil easy to process for small quantity). counteract the liquid by alkalescent liquid solution. After three stage of filtration, the litmusless waste water was introduced to evaporator(use the heat of the flue of main processor as its heating resource)

   3. Waste solid. The solid residua will be left after the catalyst splitting from scrap plastic, approximately composes the waste plastic weight about 5% to 10%. Its main component is the thick black carbon. It can be the raw material of the production industry of black carbon. Also could be mixed with the pulverized coal ash which produces for the raw material thermal power plant, also could be the raw material of manufacture pulverized coal ash brick (one kind of environmental protection building material)