Click for original picture
Brand:aa
Product detail:
SPECIFICATION FOR FUEL OIL:
COMPONENT RESULT
1. Ash content, not more % 0,14
2. Mass fraction of sulphur, not more %
- low sulphur residual oil 0,5
3. Temperature of the flash, not less ºC
in the closed crucible
In the open crucible ºC 110 min
4. The temperature of solidification, not higher ºC 25
5. Kinematics viscosity 118 max
6. Water content 0.5%
7. Mechanical impurities Lower than 0.1%
8. Acidity Lower than 5 mg KOH/ 100ml
9. Alkalinity nil
10. Gross Calorific Value Kcal/kg / KJ/kg Min9200/41300
11. Density at 15.0 deg. C Kg/l 0.8900-0.9200
12. Hydrogen Sulfide Content (H2S) pom 0.5 max
13. Carbon Residual Lower than 7%
14. Vanadium (V) ppm 123
15. Aluminium (Al) ppm 5
16. Silikon (Si) ppm 12
17. Nickel (Ni) ppm 49
18. Asphaltenes m/m 3.6%
19. Destilation @4 mm Hg
Extracted to 760mm Hg
Initial Boiling Point deg. C 216
5% recovered deg. C 259
10% recovered deg. C 310
20% recovered deg. C 358
30% recovered deg. C 445
40% recovered deg. C 502
50% recovered deg. C 534
60% recovered deg. C 538
75% recovered deg. C 545
80% recovered deg. C -
90% recovered deg. C -
Final Boiling point deg. C 550
Percent Recovered vol 78%
Residu vol 22%
Total Nitrogen m/m 0.192%
20. Sodium (Na) ppm 15
