Click for original picture
Legal status confirmed
Brand:aa
Product detail:
Processing features of the charcoal briquette machine
1. Raw material: sawdust, crop straw, wood branches, rice hull, bamboo sawdust, peanut shell, sunflower shell, furfural dregs, cotton stalks, corn stalks, sesame straw, corncob and shrubs broken branches.
2.Raw material moisture within 8-12%.
3.The raw material density is generally about 130kg/m3, and the density of formed charcoal bar is 1100-1400kg/m3.
4. These raw materials are crushed first, and then compressed into formed fuel products with high density and high calorific through machine pressing and heating.
5. The charcoal bar combustibility has been greatly improved as the size is one over ten of the original.
6. Thermal efficiency of the charcoal bars are enhanced by 30%-40%.
7. After carbonization, the bars are silver black, in hollow quadrangle or hexagon columnar type, with glossy section.
Usage of the charcoal briquette bars
1. Machine made charcoals are widely used for family to get warm.
2. These charcoals are with large demands for international barbecue markets.
3. It can display the coal and heavy oil to burn steam boiler in industry.
4. The charcoals can be chemical raw material to deep process activated carbon, carborundum, crystal silicon and so on.
They are the necessary raw materials for carbon disulfide factory, mosquito-repellent incense factory, explosive plants, copper processing factory and casting factory.
Advantages of the charcoal briquette machine
1. Briquettes are cheaper than coal .
2. They are environment friendly products as there is no sulfur in briquettes.
3. Biomass briquettes have a higher practical thermal value and much lower ash content.
4. Briquettes have high burning efficiency and there is no fly ash .
Technical Parameters
Model | ZBJ07 |
Power | 22kw |
Capacity | 350-400kg/h |
Charcoal diameter | 60/70/80mm |
Raw material moisture | 8-12% |
Overall size | 2.02 X 0.87X1.5m |
Weight | 1180kg |
