High Quality Palm Oil Biodiesel

Brand:aa

Product detail:

                                         High Quality Palm Oil Biodiesel  

 

item	standard		Test way
	S500	S50
Density (20°C) / (kg/m³)	820--900		GB/T 2540
Kinematic viscosity (40°C)/(mm²/s)	1.9-6.0		GB/T 265
Flash point(closed cup)/°C      ≥	130		GB/T 261
Titre C(melting point) /°C	Actual measure		SH/T 0248
Sulphur content(mass fraction)/%	0.05	0.005	SH/T 0689
10% Carbon residue (mass fraction)%             ≤	0.3		GB/T 17144
Ash content (mass fraction)                    ≤	0.020		GB/T 2433
Moisture (mass fraction)                       ≤	0.1		SH/T 0246
mechanical impurity	NO		GB/T 511
corrosiveness to copper-copper strip(50°C, 3h)/grade                    ≤	1		GB/T 5096
Cetane number                   ≥	49		GB/T 386
Oxidation stability(110°C)/hour     ≥	5.0		EN 14112
Acid value/(mgKOH/g)            ≤	0.8		GB/T 264
free glycerol content(mass fraction) %              ≤	0.020		ASTM D 6584
total glycerin content(mass fraction) %              ≤	0.240		ASTM D 6584
90% recovered temperature         ≤	360		GB/T6536

 

 

 

 

 

Oil Yield of Raw Material

 

1.General plastic :

lPolyvinyl chloride: PVC(thin film , electric cable, floor board, tube plate, pipe, shoe sole, toy, door and window , stationery etc )not easy to refining

lPolyethylene: PE(thin film , bottle , electrical insulating materials, hand bag , water pipe, oil drum, drink bottle, articles of daily use etc )oil field is about 95%

lPolypropylene: PP(thin film , plastic rope , tableware, basin, barrel, furniture, woven bag, bottle cap, car bumpers etc )oil field is is about 90%

lPolystyrene: PS(electrical appliance, stationery, cup, food container, electric products housing, electrical accessories, foam products, toys etc) oil field is is about 90%

lABS engineering plastic: oil field is is about 40%

lPure white plastic cloth: oil field is about 70%

lInstant noodles packing bags: oil yield is about 40%

lPlastic lable: oil yield is about 20%

lWasted by papermaking factories: oil yield of high water content materiali is about 15%~20%, dry material is about 60%

lHousehold garbage : oil yield is about 30%~50%

lPure plastic cable sheath : oil yield is about 80%

lClean plastic bag: oil yield is above 50%

 

2.Normal Rubber

lTires of big car : oil yield is about 45%

lTires of small car and bicycle : oil yield is about 30%

lRubber cable sheath , shoe sole: oil yield is about 35% , gym shoes is about 20%~30%

lWaste chemical fibber carpet material: oil yield is above 30%

lPMMA: oil yield is about 90%

lMiscellaneous rubber: oild yield is about 30%

 

Remark:

There is rubber ,carbon black, steel wire in the tyre , pyrolysis speed is faster

The composition of plastic is more complex , pyrolysis speed is slower

 

3.Oil yield of waste straw

 Wheat strew , corn stalk , peanut straw, soybean stalk , cotton straw , rice straw , wood dust : 30%~40%

 

 

Final Product and Application:

 

Final product of tires material: 45% tyre oil ; 30% carbon black ;12%~15% steel wire ; 5%~8% waste gas. Tyre oil ,also called fuel oil (it can be used both for further processing and as fuel of boiler , bath center ,restaurant, baking floor tile etc ) , can be sold directly , or be further processed into organic solvent and vehicle fuel by refining equipment .

Carbon black can be sold directly as fuel , price is about 600RMB~1700RMB/ton . also can be further processed by carbon black refining equipment . There are two models of this equipment : the final products of one model can be made into rubber or tyre filler , the final products of another model can be used as industrial carbon black or ink etc .

Plastic oil which can be called as fuel too , can be sold directly or used as fuel .

The quality of plastic carbon black is a little lower , price is about 500RMB/ton , used as fuel , similar as other waste material .