hot melt adhesive heat shrink cable joint sleeve CRSM

Brand:aa

Product detail:

hot melt adhesive heat shrink cable joint sleeve

 

Description

Heat Shrinkable Cable Repair Sleeve (HSRS-N) is made of a cross-linked, heat-shrinkable, thermally stabilized polyolefin, which is coated with a hot-melt adhesive, it will bond at the temperatures attained during the shrinking operation. The HSRS-N has an aluminum canister providing mechanical protection of joint. Flexible crowns at the ends provide a smooth transition from the joint to the cable.

 

Features

>Quick and easy installation
>Covered with thermo paint
>Protection against mechanical stress
>Sleeve and channel can be cut to suit shorter applications
>For insulation on low voltage cable up to 1000V
>Hot melt adhesive forms a durable, moisture resistant seal
>Fit a wide range of cable sizes

Technical Data  

Property	Test Method	Standard Value
Tensile strength	ASTM-D-638	≥13MPa
Elongation at break	ASTM -D- 638	≥300%
Tensile strength after aging	ASTM-D-2671/120°C,168hrs	≥11MPa
Elongation at break after aging	ASTM-D-2671/120°C,168hrs	≥210%
Volume resistance	ASTM-D-2303	≥1×1014Ω·cm
Dielectric strength	IEC 243	≥20kV/mm
Longitudinal shrinkage	-	≤ 10%
Eccentricity	ASTM-D-267	≤30%
Water absorption	ISO 62	≤0.1%

 

 

Specification 

 

 

*Alternative for Raychem CRSM,3M HDCW, CANUSA CRDW