Click for original picture
Brand:aa
Product detail:
Product name: Air Ceramic Heater Industrial
The components:
1.Base body:made of ceramic material with good heat shock property.
2.Heating nature:sintered by high quality nichrome wire.
3.Glaze:composed of metal oxide material with good far infrared radiated property.
4. Put right amount of additive and improve radiant intensity and strengthen adaptability of glaze billet
Main technical parameter and property:
1.Radiated characteristic: the tiptop single color of radiance of element can reach 0.9 | |
2.Time of heating response: from room temperature to surface temperature of radiated plate, the fixed time will not exceed 20 minutes. | |
3.Cold and hot resistance: the base body is heated to 800 C and put in cold water repeatly for many times and no cracking. After cold and hot mutual change test for five times, no peel and no craze. | |
4. The radiated element is heated after electrifying to rating power and immerged into cold water after interruption of power supply for forty times without damage. | |
5.Good chemical stability; strong causticity-resistance; perfect oxidation-resistance | |
6.The heating damage of non radiated surface is small. | |
7. Resistance in common temperature: | 1012 ohm 0cm |
8.Uneven degree for radiated surface temperature:≤15% | |
9. Rupture strength for base body: | 440Kg/cm2 |
10.Tolerance of power: | ≤5% at rating working voltage |
11.Cold state insulated resistance | 500V tramegger>2 mΩ |
12.Thermal state insulated resistance: | 500V tramegger>5 mΩ |
13.Using life span: | >3000 hours |
14.The effect of energy saving is obvious, increasing 10-25% compared with silicon carbide element | |
15. The life span can prolong more than a few times compared with silicon carbide element. | |
Photos for reference:
Our ceramic heater is made of best material, our guarantee is 3 years .
