Click for original picture
Brand:aa
Product detail:
MODEL | HSP-250-5 | |
OUTPUT | DC VOLTAGE | 5V |
RATED CURRENT | 50A | |
CURRENT RANGE | 0 ~ 50A | |
RATED POWER | 250W | |
RIPPLE & NOISE (max.) Note.2 | 100mVp-p | |
VOLTAGE ADJ. RANGE | 4.5 ~ 5.5V | |
VOLTAGE TOLERANCE Note.3 | ±2.0% | |
LINE REGULATION | ±0.5% | |
LOAD REGULATION | ±1.0% | |
SETUP, RISE TIME | 3000ms, 50ms/230VAC 3000ms, 50ms/115VAC at full load | |
HOLD UP TIME (Typ.) | 16ms/230VAC 16ms/115VAC at full load | |
INPUT | VOLTAGE RANGE Note.5 | 85 ~264VAC 120 ~370VDC |
FREQUENCY RANGE | 47~63HZ | |
POWER FACTOR (Typ.) | PF≥0.95/230 VAC PF≥0.98/115 VAC at full load | |
EFFICIENCY (Typ.) | 87% | |
AC CURRENT (Typ.) | 2.8A/115VAC 1.4A/230VAC | |
INRUSH CURRENT (Typ.) | 35A/115VAC 70A/230VAC | |
LEAKAGE CURRENT | <0.6mA / 240VAC | |
PROTECTION | OVER LOAD | 105~135% rated output power |
Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||
OVER VOLTAGE | 5.75 ~ 6.75V | |
Protection type :Shut down O/P voltage, re-power on to recover | ||
OVER TEMPERATURE | 80°C±5°C (TSW2) detect on heatsink of power transistor; 80°C±5°C detect on heatsink of output transistor | |
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down | ||
FUNCTION | FAN CONTROL | RTH3≥60±10°C Fan on; RTH3 ≤40±10°C Fan off |
ENVIRONMENT | WORKING TEMP. | -40~+70°C (Refer to derating curve) |
WORKING HUMIDITY | 20~90% RH non-condensing | |
STORAGE TEMP., HUMIDITY | -40~+85°C, 10~95%RH | |
TEMP. COEFFICIENT | ±0.03%/°C (0 ~ 50°C) | |
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |
SAFETY & EMC (Note 4) | SAFETY STANDARDS | UL60950-1, TUV EN60950-1 approved |
WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH | |
EMC EMISSION | Compliance to EN55022(CISPR22) Class B, EN61000-3-2,-3 | |
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, EN61000-6-2, heavy industry level , criteria A |
OTHERS | MTBF | 179.7Khrs min. MIL-HDBK-217F (25°C) |
DIMENSION | 199*105*41mm (L*W*H) | |
PACKING | 0.97Kg; 16pcs/16.5Kg/0.87CUFT | |
NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that is still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details. | |
