300 kva Open Diesel Generator Set - 3 Phase

Brand:aa

Product detail:

300 kva Open Diesel Generator Set - 3 Phas

 

Industrial Customized Generator Photos:

 

 

 

300kva Main Technical Data Reference:

 

GENERATOR SET
Genset Model	ZDE-240OT3
Prime Power  (KVA/KW)	300/240
Standby Power  (KVA/KW)	325/260
Frequency & Voltage	400/230V, 50HZ
Number of  Phase	3
Genset Type	Open
Reference Dimension & Weight (W*H, mm)/KGS	3500*1120*1650,2700KGS
DIESEL ENGINE
Engine Brand & Model	Cummins NTAA855-G1A
Rated Output	240KW
Rated Speed	1500RPM
Engine Type	Four stork, in-line water cooled
Number of Cylinder	6
Bore * Stroke	105*125mm
Aspiration Method	Trubocharged
Governor	Electronic speed governor
Starting Method	Electric starting
Cooling Method	Forced water cooled
Lubrication Method	Pressure & splash lubricating
Fuel Consumption	60.6 L/H
ALTERNATOR
Alternator Brand & Model	Stamford/Leroy Somer/China reputed one
Type	Brushless & self-excited
Number of Phase	3
Volatage	400/230V
Frequency	50HZ
Power Factor	0.8
Insulation Grade	H
Protection Grade	IP22/23
Altitude	≤1000m

 

 

You may also like these gensets:

 

 

Cummins / Stamford Genset Features:

 

1. Engine: Cummins industrial diesel engine

 

2. Heat Dissipation: Radiator 40°C max, fans are driven by belt, with safe guard

 

3. Protective Operation: Choice of manual/auto and AMF control panels and protection systems

 

4. Control Panel: Digital auto-start LED panel

 

5. Shakeproof: Anti Vibration Suspension Absorber

 

6. Safe Filter: Dry type air filter, fuel filter, oil filter

 

7. Breaker: Mould case circuit breaker

 

8. Power: 24V DC start motor and storage battery

 

9. Nozzle: Ripple flex exhaust pipe, exhaust siphon, flange, and muffler

 

 

Our bussiness partners:

 

 

 

CE Certifications:

 

 

 

Generators Use Conditions:

 

1. Operators need to be familiar with the operation of generating sets, operating methods, and all control bodies, manual valves, stopping body position.
2. In the engine room or near the unit, must hoisting of danger notices warning signs associated personnel:
(1) Units exist electric shocks danger;
(2) Units exist scald danger;
(3)Units exist winding, and collision dangers;
3.To avoid fuel, lubricants, and other fire, engine room No smoking.
4. Engine room or other nearest should maintain an appropriate level of fire service equipment (proposed CO2 fire extinguishers).
5. Grounding the entire unit reliably, and meet the applicable requirements of neutral grounding.
6. Above and around the unit should not be unrelated equipment, obstructions and dangerous goods, should be keeping the floor dry and clean without oil.
7. Units will be run by noise, suggest that the staff wear suitable protective equipment, such as earmuffs vehicles.
8.Before any maintenance, must cut off all power lines, particularly the Dc power supply circuit (remove the battery’s anode and cathode), the warning signs must also note “is maintenance“, and should have another concern, especially in the narrow region maintenance at the same time should be notified stop all of this unit operation.
9. To the reliable operation of unit, the settings of unit voltage, frequency, speed and other related parameters and unit controller set up should not be arbitrarily changed except the specialized operators.
10. Units are valuable equipment, for personal safety, operation stability to light, no illegal operation and drink operation.