Click for original picture
Legal status confirmed
Brand:aa
Product detail:
Technical parameters for DIKA inkjet printer machine :
| Item Model | Specifications | |||
| DK-1608 | DK-2008 | DK-3208 | ||
| Print Head | Epson DX5 or DX7 Printhead optional 180nozzles*8lines*1head | Epson DX5 or DX7 Printhead optional 180nozzles*8lines*2heads | Epson DX5 or DX7 Printhead optional 180nozzles*8lines*2heads | |
| Printing Width | Max 1560mm | Max 1950mm | Max 3250mm | |
| Printing Speed (Based on DX7 printhead) | (3pass)24m2/H | (3pass)54m2/H | (3pass)60m2/H | |
| (4pass)18m2/H | (4pass)36m2/H | (4pass)40m2/H | ||
| (6pass)12m2/H | (6pass)24m2/H | (6pass)26m2/H | ||
| Ink | Sort | Water Based Ink /Eco Solvent Ink | ||
| Capacity | (Double) 4 Colors:220ml each | |||
| Media | Width | 1520mm | 1850mm | 3200mm |
| Sort | PP Sythentic Paper,Vinyl Sheet,Film,Coated Paper,Acid Proof Paper Banner,Canvas etc,Adhesive Vinly Sheet,Banner,etc. | |||
| Media Heater | Pre /Print /Post Heater(can be controlled separately) | |||
| Media Take-up Device | Strong rolling take-up device with the automatic damper | |||
| Interface | USB2.0 | |||
| RIP Software | Maintop V5.3, Photoprint, Topaz, Seeget | |||
| Operation Environments | Temperature:20°C-35°C, Humidity:35%RH-65%RH | |||
| Packaging(L*W*H) | 2650x650x700mm | 3010x650x700mm | 3950x710x700mm | |
| Net Weight | 80KGS | 110KGS | 300KGS | |
| Gross Weight | 120KGS | 160KGS | 400KGS | |
Features and advantages:
The features of the device are described below. Together with the method of operation of the
Device explained in this manual, they help you understand how to use the device properly.
True 1440dpi high quality plotting
Plotting with 1440dpi high quality is suitable both for small and large posters.
Intelligent heater
Mounts three heaters (front heater,middle heater,back heater) with independent temperature
setting and intelligent functions (standby mode and automatic off),
The device detects the ambient temperature to perform temperature control, allowing heating
temperature setup which best suits the medium used.
Easy ink replacement
The ink cartridge can be replaced safely and easily without getting your hands dirty.
Easy maintenance
The automatic capping system allows not to wash the Heads the need of head cleaning before
Turning off the power.
Nozzle clogging can be recovered by performing the cleaning function.
If the device is not in use for a prolonged period of time, it automatically performs Nozzle-
Clogging preventive operation at fixed intervals. However, the main power must be left turned
on.The device monitors the time period when not in use. When the power is turned on or when plotting is started, it automatically performs head cleaning to prevent from clogging Nozzle.
Indication of the INK Remains
Since the amount of ink that remains can be checked even during operation of the device, you
can use the ink and medium without waste.
Simple display
The LCD panel displays the device setting menu in two lines (not one line), making it easier to
see.Since the LCD panel is provided with a backlight, the display can be clearly seen even in a
dark place.The LCD panel can display two different languages for each, including English and Chinese.
Display plotting condition
It is possible to have the printing process displayed on the LCD panel and the plotting conditions
to be plotted for confirmation during operation of the device.
TAKE-UP DEVICE for plotting on a long length
Since the take-up device that is interlocked with the device winds up the medium as it is plotted
on,even a long medium can be used.
A newly provided medium support bar
The device is provided with a medium support bar at the back. It is useful when a heavy medium,
such as Tarpaulin, is set on the device.
Selectable head height
The head height can be set to 1.5-8 mm by turning screws on carriage.
Prevents lifts at both ends of medium
The use of the curl stopper prevents lifts at both ends of diverse media and contact with the
head.
