PLFF-25030-PET-BL Luminous film, paper luminous

Brand:aa

Product detail:

 V-CAN V-MARK^TM  REFLECTIVE MATERIAL         PLFF-25030-PET-BL   Luminous Film

 

Description

• V-CAN V-MARK^TM luminous film PLFF-25030-PET-BL is a high performance photo luminescent film for safety and emergency exit signage. 

• It has distinctive characteristics after it is exposed to light energy (sunlight, ultraviolet ray, fluorescent lamp and so on).
• It continues emitting visible light for many hours in the darkness without any excitation light sources.  

Feature

• Polyester material.

• Self-adhesive backing (PSA backing), superior PSA adhesion for easy installation.

• Rechargeable “glow in the dark” signs and markings.

• Expected performance life: 10 years

• Excellent chemical and stain resistance.

• Dimensionally stable, durable, multilayer film. 

• No radioactive materials used in manufacture of this product. 

• May be safely disposed of in a sanitary landfill or by incineration.

• High conformability  
• Wide usage of signs and markings

Meet and exceeds

• New York City Bldg. Code Ref. Std. RS 6-1 and RS 6-1A.
• ASTM E2072, IMOA.752,  OAHA 1910, 2000 IBC, DIN-67510 Part 4.

Application and Uses

• Primarily intended for interior luminous signs and markings, including safety signage , code compliant building signage, marine, passenger rail and military in buildings.
• Can be applied easily to walls, ceilings, doors and railings.
• Adheres to a variety of substrates.

Limitations of End Uses

 

V-CAN V-MARK^TM  luminous film is not intended or warranted for the following:

• Application surfaces subjected to gasoline spills or vapors.
•  Application to complex curved surfaces, corrugated surfaces or riveted surfaces.
• Outdoor applications.

Product Data

 

Physical Properties	Property Description
Visual Appearance	Glossy appearance, light yellow green color
Adhesive	Permanent pressure sensitive
Application Surface	Flat, simple curves
Application	50°F to 100°F
Temperature Range	10°C to 38°C

 

Technical Data (mcd/m2)

 

(excitation source is 1000 LX, test begin at saturating amount of excitation energy)

 

Emission peak	5 seconds	30 minutes	60 minutes	480 minutes	600 minutes	720 minutes
≥1000	≥1000	≥80	≥30	≥3.0	≥2.5	≥2.0

  

Typical Physical Properties

 

Property	Values
Thickness (film and adhesive)	9-11 mils
Service temperature range	-30°F to 200°F -34°C to 90°C
Application temperature range (air and substrate)	50°F to 100°F 10°C to 38°C
Applied shrinkage	0.031 inch 0.8 mm

  

Cutting

 

The accepted cutting methods for V-CAN V-MARK^TM luminous film are bandsaw, guillotine,hand cut, die cut, and flatbed electronic cutter.

 

Printing

 

Available for graphic printing and plotter cutting.

 

Chemical Characteristics

 

Resists mild acids, mild alkalis, and salt spray.

 

Performance Life

 

The performance life of luminous film may vary depending on application techniques. Experience has shown that when properly applied, this material will remain highly effective for safety and emergency exit signage for up to 10 years but no warranty of durability is given for this material.

 

we also offer another types  luminous film for your selection, with glowing time for 5/10 hours respectively. 

 

Tag

 

luminous film, Glow In the dark tape, Night glow film, Luminescent film, Luminous paper, Safety glow in dark tape, Night glow luminescent film, Adhesive mylar film sheets, luminescent vinyl film.     

 

Foto luminiscente cinta, Brillan en la cinta oscura , Película Resplandor de la noche, Película Resplandor de la noche, papel luminoso, Resplandor seguridad en cinta oscura, Noche resplandor película luminiscente, Hojas de película de mylar adhesivas, película de vinilo luminiscente.

 

Foto luminescente fita, Brilham no escuro fita, Brilho filme noite, Filme luminescente, Papel luminoso, Brilho segurança em fita escura, Noite filme brilho luminescente, Folhas de filme de Mylar adesivas, Película de vinil luminescente.