life casting silicon for making sex doll

Brand:aa

Product detail:

Liquid Silicone Rubber for Sex Toy 

 

1. Description of liquid silicone rubber for sex toy  

1)addition Cured liquid silicone rubber for sex toy are generally named as two-part addition silicone rubber that vulcanises at room temperature.

2)addition Cured liquid silicone rubber for sex toy are  Part A is a flowable liquid, part B is the curing agent(platinum catalyst).

3) liquid silicone rubber for sex toy features an exceptional fluidity ,good operability,excellent physical properties and very low shrinkage.

4) liquid silicone rubber for sex toy are mixing ratio between Part A and Part B can be 10:1 or 1:1.  

  

2. Features of liquid silicone rubber for sex toy  

Liquid Silicone Rubber for sex toy ,It has good electrical performance, chemical stability with features of waterproof, corrupt resistance, physiological inert, non-toxic, tasterlessness, aging-resistance, easy pouring, easy operation, and completely vulcanization. It can meet requirement of the Mechanical strength even under a very low hardness. When making printing pads, it will be with low shrinkage and can keep its initial hardness as original after a long time using. So it is the specially suitable material for life-casting and printing pad making.

 

3.Technical Parameters of  life casting silicon for making sex toy:

 

Model	Color	Mixing ratio (%)	Pot life (mins)	Demould time ( hrs)	Hardness ( A0 )	Tensile-strength (kgf/cm2)	Tear-strength (kgf/cm)	Viscosity (cps)	Shrinkage rate (%)	Elongation (%)
E610#	Translucent	1:1	30-40	3-5	10	60±2	20±2	5000±1000

 

Model	Color	Mixing ratio	Pot life (mins)	Demould time ( hrs)	Hardness ( A0 )	Tensile strength (MPa)	Tear-strength (kN/m)	Mixed Viscosity (mPas)	Shrinkage rate (%)	Elongation (%)
E-620	Light yellow	1:1 or 10: 1	30-40	3-4hrs(25°C) 20-30mins(60°C)	20±2	≥ 5.0	≥ 19	6700	≤0.1%	450%

  

4.Packing of  life casting silicon for making sex doll

 

Specification:50kg/set (A:25kg , B:25kg)

  

 

5.Storage and transportation of   life casting silicon for making sex doll:

 

It should be stored in dry place,the shelf life is one year(below 25°C)

 

It’s the non-dangerous goods, and it should be transported as the common  chemicals 

 

 

Attetion for Addition cure Life casting silicon for sex doll

1. This product need to be packed in clean, dry and sealed steel cans or drums. Part A and B need to be packed seperately. Usually it is packed in 5kg/can, 20 kg/drum, or 200 kg/drum .

2. Please keep the material in a cool and dry place. Specially note that the silicone should not touch or mix with compounds including nitrogen, phosphorus, sulfur, tin, lead or metal organic acid. Otherwise, the catalyst will be poisoned, then the silicone can not be cured or just particially cured. For specific precautions, please refer to the instructions in Electronic Potting Silicone part.
3. The goods is NOT subject to IMDG.The shelflife is 18 months from the date of production.And it still can be used after expired, when retest to be qualified.

 

For more information , pls feel free to contact

Ms Mary

Office No. :0086-755-89311348

Mob:86-18938867578

Skype: mary901116

Email :hyxh(at)szrl(dot)net

Welcome to our website www dot szrl dot net