liquid ptfe spray coating material

No

Item

Liquid PTFE DF-301

1

Appearance

Milky or yellow liquid

2

PTFE Content, %

60±2

3

PH Value

7-10

4

Viscosity (25°C),(Pa.s)

(15-30)x10^-3

5

Content of case active agent

4-6

6

For process

Coating and impregnating

7

Particle size

0.2μm

8

Usage

The liquid PTFE coating is used for impregnating porous material, such as asbestos, fiberglass, anti-corrosive, abrasion resistant, filature and lubricating materials.

9

Packing, Storage, Transportation

1. The liquid PTFE coating material is packed in PVC circular barrels. On the barrel, there should be attached label and quality certificate, on which there are brand, lot No. and net content 25kg. The PTFE should be stored in room temperature no less than 5°C and periodically sire it to prevent from settlement.
2. The liquid PTFE coating material are transported according to non-dangerous products. Heat, moisture, freezing and strong shock should be avoided during transportation. Over-dumpiness is adapt to make the liquid ptfe settle down.