cylinder hydraulic pressure testing equipment

Brand:aa

Product detail:

 cylinder hydraulic pressure testing equipment

 

 

About us (Raoyang Hongyuan Machinery Co.,Ltd)

 

 

 

     Hebei Raoyang Hongyuan Machinery Co.,Ltd (Hebei Hydraulic test pump factory) is located in Raoyang,Hebei province,China. Our company have four main products series ,fire fighting machine (fire extinguisher filling machine ,fire extinguisher maintenance equipmen), hose crimping machine , hydraulic test pump and metal band sawing machine , etc.

 

 

 

 

 

 

 

     We have more than 20 years' export experience in our machines. Each month we export our machine not less than 50 sets . More than 81% of our products are widely exported to Europe,America,Sountheast Aisa,The middle east and other countries and regions.where our poducts have good reputation.

 

 

 

 

 

Introduction of machine

 

 

steel cylinder hydrostatic pressure test equipment/cylinder hydraulic pressure test machine

 Overcoming the every kind of the abuses in electronic way for returning water to restored position, our products have the higher equipment reliability and a more convenience for operation. In an old way, the returning water angle and the restored position are controlled by a journey switch. Due to the inertia moment will be changed as the loading change after the motor stop, the returning water angle and the restored position are very difficult to determine and the reliability of the journey switch is low, so it is very easy to take place an accident. However the determining the returning water angle and the restored position in a pneumatic device is determined by the stroke of the cylinder, so the  returning water angle is stable and the restored position is reliable. In addition, the toppling speed of the steel bottle can be adjusted in no class by the anechoic throttle on the manual controlled valves of returning water and restoring position, which is easy and reliable.

The performance parameters

1.  The rational water test pressure              P1=22.5MPa

2. The valve automatic control wrest moment on the spindle       M1=300N·m

3. The maximal wrest moment on the spindle gas valve            M2=450N·m

4. The returning water angle                     R=145^O

5. The drive motor

      The model           Y90S-4

      The power           1.1KW

      The rotation speed           1390r/min

6. The power source     380V/50HZ

7. The gas source     P=0.7-0.8Mpaa safety gas

8. The top & bottom stroke of the spindle          S1=530mm

9. The stroke of the steel bottle clamping machine      S2=100mm

10. The outer sizelength×width×height

            a. The main body size1000×600×3000

b. The electric operation station600×450×1150

The electric box without the test pressure pump is installed on the main body of the equipment

c. The electric test pressure pump 655×480×1055

11. The weight the main body 750Kg

12. The specification of the measured steel bottleThe diameter    Φ210Φ220

    The height     H=1200-1600mm

 

 

The photos of machine

 

 

 

 

The packing of photos

 

 

Contact information

 

 

We have abtained the ISO9001-2008 Certificate and CE Certificate, and Original of Certificate can be supplied if needed

 

 

 

Please contact me freely if you are interested in any item,

 

I will provide you with my best after-sales service ,best quality, and timely shipment.

 

You can send me E-mail or Fax 0086-318-7321606 or give me a call :86-18731835598

 

Thanks in advance