Drilling mud chemical Anionic Polyacrylamide

Click for original picture
Fob Price: 3000.00 USD/ 
MOQ: 3  
Payment Terms: delivery withindays since payment
Location: China
  Ms. Karin Chang    Contact Now 询价
Not exactly what you want? Post a quick Buying Request !
 
 
Product Detail

Brand:aa

Product detail:

Oil displacement agent polyacrylamide chemical

 

Anionic PAM, copolymerized by acrylamide and acrylate, is a polymer with super high molecular weight which over 22 million. It has great adsorption-bridge effect, good watersolubility, even can be completely dissolved in cold water, can shows larger effect when used with inorganic flocculant( polyluminium chloride, Polyferric chloride). Different models can be used according to the different application and the requirements of clients for the products performance.

It mainly used:

1) Industrial sewage treatment chemicals

2) Drinking water treatment

3) Starch plant and the loss of alcoho plant starch and wine slots of recovery

4) Oil displacement agent for the teritiary oil recovrey

5) Plugging agentof profils control

6) Auxiliary of papermaking industry.

7) Thickening agent.   

 

The Anionic Polyacrylamide for the flocculating, dossing quantity  is iroganic flocculat 1/50, but the effect is iroganic flocculat several times, even more.

 

 

Classification: Chemical Auxiliary Agent

CAS No.: 9003-05-8

Other Names: POLYMER

Purity: 90

Place of Origin: SHANDONGChina (Mainland)

Type: Adsorbent

Adsorbent Variety: Molecular Sieve

Usage: Paper Chemicals, Petroleum Additives

Brand Name: YONGXING

Model Number: PAM-C615

Appearance: Powder

Color: White

 

Molecular Weight (million)/adjustable

Degree of Hydrolysis

(adjustable)

Solid Content%

Effective PH Range

Residual Monomer Content%

23-25

35-45

>90%

5-14

<0.05

21-23

35-45

   

19-21

30-40

   

17-19

25-35

   

15-17

25-35

   

13-15

20-30

   

11-13

20-30

   

9-11

10-25

   

8-9

10-20

   

5-7

6-15

   

 

 

Safety:

 

PAM is non-poisonous and non-corrosive. If it is stuck to the skin, eye or inhaled into the mouth, water should be used in time to rinse it out.

Jiangsu Yijing Environmental Protection Co., Ltd. is located in the state-level high-tech development zone - China Yixing Industrial Park for Environmental Science & Technology, specializing in producing fine chemicals, and environmental protection equipments, and the developing of technologies of sludge recycle and re-use of industrial wastes.

Yijing is the Key enterprise specializing in China environmental protection industry, and High-tech Company of Jiangsu Province. We have been awarded ...

Mainly Usage

 

Polyacrylamide is a linear water-soluble polymer with high molecular weight. It is mainly used for: solid-liquid separation in mineral separation, metallurgy, chemical and food industries, etc.; the sewage treatment of iron and steel, textile, paper-making, chemical and pharmaceutical industries, etc.; the drilling in oil industry and enhancing in oil recovery; as retention reagent and filter aid, reinforcing agent in paper-making; the treatment and purification of urban sewage and potable water.

 

Properties

 

    Compared with the products of powder type, colloid type and emulsion type, water-medium dispersing type polyacrylamide has the following advantages:

 

    1. It dissolves faster, consumes less energy, has better anti-shearing property than powder type product without powder pollution when used;

 

    2. It has higher concentration and lower viscosity, dissolves faster than colloid type product with easier operation.

 

    3. Compared with emulsion type product, the biggest advantage is that there is no mineral oil and surface-active agent in it and therefore there is no secondary pollution to the environment.

 

Attention:

 

    1. Before being used, PAM should be dissolved into solution of 0.1-0.5% with clean water and it dissolves at normal atmospheric temperature. When water temperature is higher than 60 degree C, it will probably be degraded.

 

    2. To ensure complete dispersion of the product when being dissolved, PAM should be added slowly into rotating water, not too fast, otherwise the speed of dissolution will be affected or the pipes will be blocked up because of incomplete dissolution.

3. When PAM is being dissolved, the stirring speed should not be too fast, the linear velocity of the end of the stirring paddle should be less than 8 m/s. The dissolving equipment and transport pipes should not be made of iron because iron ions can catalyze the degradation of high polymer chains.

 

    4. Centrifugal pumps should not be used for the transport of the solution so as to prevent the machinery from being sheared and degraded.

 

    5. The solution should be used soon after being prepared. It will be degraded if it is placed too long and the function will be affected.

 

Packing and Storage

 

    Packed with barrels or jars of various sizes according to the request of the customers. The product should be stored in shady and cool places, away from sunlight. The product is valid for 6 months.

 

 

About us :

 

Our company is well-known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including Anionic Polyacrylamide(APAM) and Cationic Polyacrylamide(CPAM) and Nonionic  Polyacrylamide(NPAM)and Zwitter-ion Polyacrylamide, and We are always foucs on providing best products, reasonable price and perfect service for our customers, and hope to establish a long cooperation relationship with you . 

Thanks for your attention! If you are interested in our products, please let us know without fail, we will be happy to provide you a detailed information. 

 

 

 
more..Other products from this supplier

[ ProductsSearch ]  [ [ Print ]  [ Close ]


Copyright © 2004 ChinaAseanTrade.com All rights reserved
中国-东盟自由贸易网版权所有@2004 沪lCP证05013507号

沪公网安备 31010102002066号