well Textile sizing agent or Chemicals - Anionic Polyacrylamide

Brand:aa

Product detail:

Textile sizing agent or Chemicals--Anionic Polyacrylamide

 

Anionic PAM,

It mainly used:

1) Industrial sewage treatment chemicals

2) Drinking water treatment

3) Starch plant and the loss of alcoho plant starch and wine slots of recovery

4) Oil displacement agent for the teritiary oil recovrey

5) Plugging agentof profits control

6) Auxiliary of papermaking industry.

7) Thickening agent. 

 

Classification: Chemical Auxiliary Agent	CAS No.: 9003-05-8	Other Names: POLYMER
Purity: 97%	Place of Origin: SHANDONGChina (Mainland)	Type: Adsorbent
Adsorbent Variety: Molecular Sieve	Usage: Paper Chemicals, Petroleum Additives	Brand Name: YONGXING
Model Number: PAM-C615	Appearance: Powder	Color: White

 

Performance Indicators of Anionic-polyacrylamide: 

Molecular Weight (million)/adjustable	Degree of Hydrolysis (adjustable)	Solid Content%	Effective PH Range	Residual Monomer Content%
23-25	35-45	>90%	5-14	<0.05
21-23	35-45
19-21	30-40
17-19	25-35
15-17	25-35
13-15	20-30
11-13	20-30
9-11	10-25
8-9	10-20
5-7	6-15

 Mainly Usage

 

Polyacrylamide is a linear water-soluble polymer with high molecular weight. It is mainly used for: solid-liquid separation in mineral separation, metallurgy, chemical and food industries, etc.; the sewage treatment of iron and steel, textile, paper-making, chemical and pharmaceutical industries, etc.; the drilling in oil industry and enhancing in oil recovery; as retention reagent and filter aid, reinforcing agent in paper-making; the treatment and purification of urban sewage and potable water.

 

 

Oil-displacing agent of oil field tertiary oil recovery: It can adjust the rheology of filled water, increase the viscosity of driving liquid, improve water drive wave and efficiency, lower water phase permeability in ground layer, and enable water and oil to flow forward at even speed. Its effect is that it is mainly used in tertiary oil recovery of oil fields in the aspect oil production, and raw oil of about 100 to 150ton more can be produced through filling the macromolecule polyacrylamide product one ton.

 

Well drilling mud raw materials: in oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.  

 

Industrial Waste Water Treatment: Water sources of many tap water factories in China come from rivers, the sand and mineral contents are higher, water is muddy, the water still can not achieve demands although passing through sedimentation and filtration, and flocculating agent needs adding; however huge adding amount generates increased mud amount and bad effect. The adding amount is only 1/50 of inorganic flocculating agent if anionic-polyacrylamide is adopted as flocculating agent, but the effect is several times better than the organic flocculating agent, and even dozens of times. If the river water with severe organic matter pollution can be matched with anionic-polyacrylamide for use, the effect will be better.

 

Paper-making adhesive: The product can be used as fining agent, residency agent, filtration aid and paper dry and wet intensity reinforcing agent in paper-making industry.

 

Attention:

 

     1. Before being used, PAM should be dissolved into solution of 0.1-0.5% with clean water and it dissolves at normal atmospheric temperature. When water temperature is higher than 60 degree C, it will probably be degraded.

     2. To ensure complete dispersion of the product when being dissolved, PAM should be added slowly into rotating water, not too fast, otherwise the speed of dissolution will be affected or the pipes will be blocked up because of incomplete dissolution.

    3. When PAM is being dissolved, the stirring speed should not be too fast, the linear velocity of the end of the stirring paddle should be less than 8 m/s. The dissolving equipment and transport pipes should not be made of iron because iron ions can catalyze the degradation of high polymer chains. 

    4. Centrifugal pumps should not be used for the transport of the solution so as to prevent the machinery from being sheared and degraded. 

    5. The solution should be used soon after being prepared. It will be degraded if it is placed too long and the function will be affected.

 

Packing and Storage 

    Packed with barrels or jars of various sizes according to the request of the customers. The product should be stored in shady and cool places, away from sunlight. The product is valid for 6 months.

 

 

 

About us :

 

Our company is well-known as a reliable manufacture, mainly producing water treatment materials, such as Polyaluminium Chloride (PAC),PAM including Anionic Polyacrylamide(APAM) and Cationic Polyacrylamide(CPAM) and Nonionic  Polyacrylamide(NPAM)and Zwitter-ion Polyacrylamide, and We are always foucs on providing best products, reasonable price and perfect

 

service for our customers, and hope to establish a long cooperation relationship with you .

 

Thanks for your attention! If you are interested in our products, please let us know without fail, we will be happy to provide you a detailed information.