Click for original picture
Brand:aa
Product detail:
THREE LAYER ANTICORROSION PIPE
Anti corrosion layers
1.3PE anti corrosion layers: adhesive-epoxy(60-80µm),copolymer adhesive(170-250µm) and high density polyethylene(about 2mm);
2. 2PE anti corrosion layers: copolymer adhesive (170-250µm) and high density polyethylene (about 2mm)
3.Peel strength: 3PE layers is more than 100N/cm, 2PE layers is more than 70N/cm
4.Spark leak level; ≥25KV
5.impulse withstand test: ≥50kg/cm
Remark: we can use coal tar epoxy as the anti corrosion layer according to customer’s request.
Inner Steel:
Material: 20# and Q235 seamless steel tube or spiral steel tube.
Surface treatment: blasting (the standard can be GB/T9823-1988, Sa2.5)
Surface anchor pattern of the steel tube: 40—100μm (increase the surface area of the steel tube, also Improve steel adhesion)
Widely used on urban water network, chemical petroleum and natural gas, and other industrial material liquid and gas pipeline system
Applicable temperature: less than 70°C
Performance of the products
Inner steel tube | ||
specification(mm) | Steel type | Reference standard |
DN40-DN150 | Seamless tube | GB/T8163 |
≥DN200 | spiral welded steel pipe | GB/T9711.1 |
3 PE anti corrosion layers SY/T 0413-2002 | |
item | Request standard |
minimum thickness of the anti corrosion layer(mm) | 2 |
peel strength(N/cm) 20±5°C 50±5°C | ≥100 ≥70 |
cathodes(mm) (65°C,48h) | ≤8 |
Impact strength(J/mm) | ≥8 |
Spark leak detection | No leakage (25KV Voltage leak detection) |
DIFFERENT DIAMETERS OF PE ANTICORROSION PIPE
dear, we have been in this business many years , so any request ,feel free to contact with me, i will reply you soonest and my honor to be on service of you in near future.
Contact person: Hebe Ma
Tel:86-15232525213
Skype:hebema86
Fax:86-315-5773300
DIFFERENT DIAMETERS OF THREE LAYER ANTICORROSION PIPE
WELCOME TO VISIT OUR FACTORY
my friend, we will give you the quotation after we receive the inquiry within 1 day , the buyer should pay 30%T/T in advance ,and the balance should be paid after receipt of the copy of B/L
