Click for original picture
Legal status confirmed
Brand:aa
Product detail:
Electronic compound potting sillicone rubber Application:
Electronic compound potting sillicone rubber is used for high powered electronics, DC/DC module and circuit board which requires heat dissipation and high temperature resistance.It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Electronic compound potting sillicone rubber Feature:
Electronic compound potting sillicone rubber for good elasticity is a kind of low viscosity, Inherent flame resistance, two components addtion cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate),PP,ABS,PVC, etc. and metal materials.
Electronic compound potting sillicone rubber Picture show:
Electronic compound potting sillicone rubber Datasheet:
9055-Before Curing | Appearence | Black Fluid |
Density(25°C g/ml) | 0.98±0.02 | |
Viscosisty(25°Ccps) | Part A 2500±500;Part B:2500±500 | |
Mixing Ratio | A:B=1:1(By weight) | |
Operating Time(25°C min) | 120 | |
Curing time(25°C min) | 480 | |
Curing time(80°C min) | 20 | |
9055-After Curing | Hardness(Shore A) | 50-60 |
Dielectric Strength(KV/mm) | 23 | |
Volume Resistance(Ω.Cm) | 1.0×10 15 | |
Permittivity(1.2MHz) | 3.0 | |
Temperature Resistence(°C) | -60~200 | |
Fire Resistance | UL94-V1 | |
| Arc Resistance | 250V |
Electronic compound potting sillicone rubber technical guidelines:
1, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
2, Mixing Ratio: part A: part B = 1:1
3, Deaeration the mixture in vacuum pump under 0.08 MPa for 3-5 minutes.Then the mixture could be used for pouring.
4, Pls note that the thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of 80~100°C, the silicone will cure in 15 minutes; while in 25°C room temperature, the silicone will cure around 8 hours.
Electronic compound potting sillicone rubber shelf life and transportation:
1. Twelve(12) months from date of shipment when stored at 24C in original unopened packages.
2. This kind of product is non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.
Electronic compound potting sillicone rubber Package:
20Kg/pail as a set (Part A 10Kg + Part B 10Kg)
Electronic compound potting sillicone rubber Certification:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-18938867593
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
About us:
