RTV silicone rubber for candle mold making (Tin Condensation series)

Brand:aa

Product detail:

 

 

 

1. Applications of RTV silicone rubber for candle mold making:

 

RTV M 30 silicone rubber is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 2. 

  

2. Standard Datasheet of RTV silicone rubber for candle mold making : 

 

Product	Catalyzed Viscosity:cps	Base Color	Specific Gravity	Mixed Ratio	Shore A Hard	Tensile (Mpa)	Elongation %	Tear KN/m
RTV M30	30,000	Beige	1.21	100:2	30-32	≥3.8	≥460	≥2.8

3. General Description of RTV silicone rubber for candle mold making:

 

RTV silicone rubber for candle mold making and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 2%-3% at the room temperature, the silicone rubber is still operational within 30 minutes,and in 2-3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. The silicone rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. and fabrication of precision molds.

  

4. Operation Instruction for RTV silicone rubber for candle mold making :

 

The product is white or red flowing liquid with general hardness of 2250A°after curing . If the customer wants to make large products and large size molds, the mold should be made of silicone rubber with high hardness. On the contrary, if  the mold with fine and precision patterns , it should be made of silicon with low hardness. The amount of the curing agent depends on the actual requirements of the customer. If molds requiring fast drying and demould, more curing agent is needed; contrarily, if molds requiring slower drying and demould, less curing agent is needed.

  

(Note: our company does not recommend you to add silicone oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%-10% silicone oil can be added to soften the mold for easy demould.) 

 

We can provide you the best quality rtv silicone rubber with competitive price and free remold technology.

Any question ,please feel free to contact MS Betty Xu

TEL:0086-755-27052112

FAX:0086-755-27052562

Mobile:0086-15814448960

skype:betty8980

Website:www(dot)lhsilicone(dot)com