RTV-2 silicone mouldmaking rubber

Brand:aa

Product detail:

 

Description of RTV-2 silicone mouldmaking rubber 

 

RTV-2 Silicon is generally named as two-part room temperature cure silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2% curing agent, they can still be operated within 30 minutes, but will be formed after 4-6 hours. With resistance to deformation, high temperature, acid and alkali, and expansion. 

 

Features of RTV-2 silicone mouldmaking rubber 

 

1-  RTV-2 Silicon has an exceptional fluidity and good operability.
2-  RTV-2 Silicon has good Temperature and deformation resistance as well as low shrinkage.
3-  RTV-2 Silicon has High duplication times.

 

RTV-2 silicone mouldmaking rubber 

 

RTV2015	white	15 shore A	small and detailed mold	pouring way	for PU, resin, concrete, plaster, cement stone, gypsum decorations, statue mold, architecture decorative items, etc.
RTV2020	white	20 shore A	small or middle sized
RTV2025	white/translucent	25 shore A	middle sized
RTV2030	white	28-30 shore A	big size mold
RTV2024	white/translucent	24 shore A	small or middle sized
RTV2028	white	27-28 shore A	middle sized or big mold	pouring/brush
RTV2038	white	35-38 shore A	large mold	pouring way
RTV920	white	18-20 shore A	small or middle sized
RTV930	white	28-30 shore A	big size mold

 

Storage of RTV-2 silicone mouldmaking rubber 

  

When the silicone rubber is stored at or below 30 centi degree in the original unopened containers, RTV2 Silicone Base and CA30 Curing agent have a usable life of 10 months from the date of production. After 10 months stockpiles use the Stir to mix the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.

 

 

 

Note

 

RTV-2 Silicon is an industrial product and must not be used in food molding, dental human skin molding applications.

 

Package

Part A base silicone:  25kg/drum or 200kg/drum

Part B CA30 Curing Agent: 800g/bottle

   

    

The information above is just for reference, if you're interesting or have any questions, please don't hesitate to contact Berry:

 

 

E-mail: berry(at)mcsilicone(dot)com

 

Skype:berryszmc

MSN: berryszmc(at)hotmail(dot)com