thick 0.5mm-10mm teflon PTFE skived sheet in rolls

Brand:aa

Product detail:

Product:   Thick 0.5mm-10mm teflon PTFE skived sheet in rolls  

 

1. Characteristics:

PTFE skived sheet is manufactured by PTFE resin is first molded into work-blank and then skived.It bears the high and low temperature,and stable in chemical properties.

 

2. Main Features of Teflon/PTFE skived Sheet :
1) Heat resistance property---It is able to wok stably between -180°C to +260°C.
2) Excellent non-sticky property---It easier to remove those like resin, dopes, oil and other sticky things.
3) Good mechanical property with no distortion and low friction coefficient.
4) Excellent insulation property.
5) Materials like carbon, graphite and glass fiber can be filled.

6) Corrosion resistance.

7) High insulation.

 

3. Application:

PTFE SKIVED SHEET are used in reaction kettle,storage tank,valve,container,liner and gasket which work under all kinds of corrosive dielectric. It also can be used as liner of anticorrosive pipes.oilless lubricator and abheisve matenal for sliding orbit of machines and dielectric at any frenquencies. Also can be used within -180~+260 °C under the condition for no load.

 

 

4. Technical data of PTFE SKIVED SHEET:

 

Project	Unit	Standard
Tensile strength	Mpa	≥15.0
Utimate elongation	%	≥150
Apparent density	g/cm3	2.1~2.3
Dialectic strength	Kv/mm	10

 

 

5. PTFE/Teflon Skived Sheet specifications:

• Thickness: 0.2mm~8mm
• Tolerance: 20micron for 0.5mm to 3.0mm , 50 micron for 3.0mm to 12mm.
• Width: 10mm~ 2500mm
• Length: According to customer’s request
• Operation Temperature: -180°C ~+260°C
• The Monthly output: 600tons
• Packing: plastic membrane inside, wooden case outside

Remark: These are very common size, we also can supply size according to customer’s special request.

 

 

 

 

 

 

About Us

Advantaged location:

Our company are located in Zhengjiang-Deqing Economic Development Zone with an elegant surrounding and easy transportation.

 

Our mainly products:

PTFE SHEET,PTFE ROD,PTFE TUBE,PTFE FILM, PTFE GASKETS, PTFE BRIDGE SLIDING BLOCKS, BRAIDED PACKING and all special type components.

 

Ability of Production:

We have the biggest pressure machine (3500ton) for PTFE molded sheets and the most quantity of producing PTFE extruded rods in the same level in China.