Click for original picture
Brand:aa
Product detail:
Specifications of polyurethane rods:
1 Diameter: from 10mm, 15mm, 20mm, 25mm, 30mm, 35mm... to 300mm.
2 Length: 300mm, 500mm, 1000mm.
3 Material: polyether or polyester
4 Density:1.12---1.25g/cm3.
5 Certification: ISO 9001:2008
Made of casting polyurethane elastomer, polyether/polyester-TDI-moca based;
We are a leading manufacture of the castinsg polyurethane rods from Zibo of China,with 8 years export experience to many countries in the world such as Germany, Iceland, Sweden, Iran, Australia, Singapore, Chile, Brazil and so on.
Good quality and competitive price of polyurethane rod,free samples are avaliable for testing if you are in need of them.
Performance of Polyurethane rods:
Material: | Polyether | Polyester | PTMG | |
Hardness: | 40-98 | Shore A | ||
Density: | 1.12-1.25 | G/CM3 | ||
Tensile Strength: | 17-49 | Mpa | ||
100% Tensile | >3.1—6.4 | Mpa | ||
300% Tensile | >6.9—12.1 | Mpa | ||
Elongation: | >450-610 | % | ||
Elasticity Impact: | >20-30 | % | ||
Tear strength: | >50-155 | KN/M | ||
Akron Abrasion Loss: | <0.05/1.61 | CM3/ KM | ||
Compression set (22h*70°C): | <10,<5,<3 | % | ||
Physical Features:
1 | Good abrasion resistance |
2 | Wide hardness range |
3 | Mechanical intensity |
4 | Good oil and water resistance |
5 | good resistance to oxidation and Heat |
6 | Low temperature resistance |
7 | shock absorption |
8 | Good electrical insulation properties |
9 | Good tear resistance |
10 | low compression set |
