low and middle high density oil ceramic proppant

Brand:aa

Product detail:

      low and middle high density oil ceramic proppant     

 

 

1. Advantage of oil ceramic proppant   

 

shale gas ceramic proppant   is maily made from professional  bauxite, which is much better than ordinary concrete, as it has qualities of corrosion resisting and alkali-aggregate reaction resisting.

 

2.Performances of oil ceramic proppant      

 

1,Light and low density

 

2,Heat retaining and good insulating

 

3,High refractoriness

 

4,Shock resistance

 

5,Good  alkali-aggregate reaction resisting ability

 

6,Can increase oil production as high as 30%-50%

 

7,Increase life span of oil gas well

 

3. Application of oil ceramic proppant    

 

1,As oil fracturing proppant

 2,As refractory material

 3,Construction industry

 

4.Physical and chemical index  

 

Specification Performance		Sphericity	VolumeDensity g/cm3	Apparent Density g/cm3	Turbidity NTU	Difficult Solubility %	Crushing Capacity %
							52MPa	69MPa	86MPa
Low density product	70/140 mesh	≥0.7	≤1.65	≤2.95	≤90	≤7.0	≤7.0	/	/
	0.212-0.106mm
	40-70mesh	≥0.7	≤1.65	≤2.95	≤80	≤7.0	≤7.0	/	/
	0.425-0.212mm
	30-50mesh	≥0.9	≤1.65	≤2.95	≤80	≤7.0	≤8.0	/	/
	0.60-0.30mm
	20-40mesh	≥0.9	≤1.65	≤2.95	≤80	≤7.0	≤8.0	/	/
	0.85-0.425mm
Middle density product	40-70mesh	≥0.7	≤1.80	≤3.38	≤80	≤7.0	≤5.0	≤8.0	/
	0.425-0.212mm
	30-50mesh	≥0.9	≤1.80	≤3.38	≤80	≤7.0	≤5.0	≤8.0	/
	0.60-0.30mm
	20-40mesh	≥0.9	≤1.80	≤3.38	≤80	≤5.0	≤5.0	≤8.0	/
	0.85-0.425mm
	16-30mesh	≥0.9	≤1.80	≤3.38	≤80	≤5.0	≤14.0	≤20.0	/
	1.18-0.60mm
High density product	30-50mesh	≥0.9	≤1.88	≤3.50	≤80	≤5.0	/	≤5.0	≤9.0
	0.60-0.30mm
	20-40mesh	≥0.9	≤1.88	≤3.50	≤80	≤5.0	/	≤5.0	≤9.0
	0.85-0.425mm
	16-30mesh	≥0.9	≤1.95	≤3.50	≤80	≤5.0	/	≤14.0	≤20.0
	1.18-0.60mm
	12-20mesh	≥0.9	≤1.95	≤3.50	≤80	≤5.0	/	≤18.0	≤25.0