High density 40/70 mesh oil fracturing ceramic proppants

Brand:aa

Product detail:

   High density 40/70 mesh oil fracturing ceramic proppants   

 

1. Advantage of 40/70 mesh oil fracturing ceramic proppants   

 

The ceramic sand  is maily made from professional  bauxite, which is much better than ordinary concrete, as it has qualities of corrosion resisting and alkali-aggregate reaction resisting.

 

2.Performances of 40/70 mesh oil fracturing ceramic proppants    

 

1,Light and low density

 

2,Heat retaining and good insulating

 

3,High refractoriness

 

4,Shock resistance

 

5,Good  alkali-aggregate reaction resisting ability

 

6,Can increase oil production as high as 30%-50%

 

7,Increase life span of oil gas well

 

3. Application of 40/70 mesh oil fracturing ceramic proppants   

 

1,As oil fracturing proppant

 2,As refractory material

 3,Construction industry

 

4.Physical and chemical index  

 

Specification Performance		Sphericity	VolumeDensity g/cm3	Apparent Density g/cm3	Turbidity NTU	Difficult Solubility %	Crushing Capacity %
							52MPa	69MPa	86MPa
Low density product	70/140 mesh	≥0.7	≤1.65	≤2.95	≤90	≤7.0	≤7.0	/	/
	0.212-0.106mm
	40-70mesh	≥0.7	≤1.65	≤2.95	≤80	≤7.0	≤7.0	/	/
	0.425-0.212mm
	30-50mesh	≥0.9	≤1.65	≤2.95	≤80	≤7.0	≤8.0	/	/
	0.60-0.30mm
	20-40mesh	≥0.9	≤1.65	≤2.95	≤80	≤7.0	≤8.0	/	/
	0.85-0.425mm
Middle density product	40-70mesh	≥0.7	≤1.80	≤3.38	≤80	≤7.0	≤5.0	≤8.0	/
	0.425-0.212mm
	30-50mesh	≥0.9	≤1.80	≤3.38	≤80	≤7.0	≤5.0	≤8.0	/
	0.60-0.30mm
	20-40mesh	≥0.9	≤1.80	≤3.38	≤80	≤5.0	≤5.0	≤8.0	/
	0.85-0.425mm
	16-30mesh	≥0.9	≤1.80	≤3.38	≤80	≤5.0	≤14.0	≤20.0	/
	1.18-0.60mm
High density product	30-50mesh	≥0.9	≤1.88	≤3.50	≤80	≤5.0	/	≤5.0	≤9.0
	0.60-0.30mm
	20-40mesh	≥0.9	≤1.88	≤3.50	≤80	≤5.0	/	≤5.0	≤9.0
	0.85-0.425mm
	16-30mesh	≥0.9	≤1.95	≤3.50	≤80	≤5.0	/	≤14.0	≤20.0
	1.18-0.60mm
	12-20mesh	≥0.9	≤1.95	≤3.50	≤80	≤5.0	/	≤18.0	≤25.0