Brand:aa
Product detail:
ASTM A519 4130 Alloy Steel Seamless Pipe
1. Descripition of ASTM A519 4130 Alloy Steel Seamless Pipe
the steel billets is from Baosteel, Xingcheng Special Steel or Huaisteel, we do 100% visual inspection and chemical inspection randomly, then bars were cut into short pcs as per requirement of final tube length requirement to do hot piercing, the whole processing flow chart of seamless pipe as below:
2. Specification of ASTM A519 4130 Alloy Steel Seamless Pipe
Tubes shall be ordered:
2.1.1. by outside diameter and inside diameter
2.1.2. by outside diameter and wall thickness.
2.2 Tolerances
2.2.1. Values according to standards
2.2.2. Tolerances by agreement
2.2.3. Dimensions and tolerances according to standard ASTM A450
2.3 Steel grades
Steel is produced in electric arc furnace and is fully killed.
Chemical compositon as per ASTM A519 requirement
2.4 Delivery conditions and heat treatment
2.5 Surface condition
Tube surface corresponds to the standards and depends on the method of tube manufacturing and method of heat treatment.
2.6 Tube ends
The tubes are delivered with plain ends without burrs at the ends of the tube.
Upon request ends could be plugged with plastic caps
3. Packing and Protective coating
3.1 Tubes are supplied either uncoated or with the manufacturers standard mill coating at the option of the customer (subject of agreement between customer and manufacturer).
3.2 Packaging of ASTM A519 4130 Alloy Steel Seamless Pipe
Tubes are packed in round or hexagonal bundles with weight max.2000 kg. Other possibilities by agreement.
4. Mill Test Certificate
Types of inspection documents according to EN 10204 3.1.B Inspection certificate
5. Quality System(ISO9001&TS16949)
7. Quality Control
Hi,this is Christina,thanks very much for your interest in our products,If you want such steel tubes and pipes,or the standard is not listed above,pls do not hesitate to contact me at once.pls tell me,it's my honor to service you!
Skype: christina.haibinjx
Tel:+86-18056100777