1050 aluminum roofing sheet corrosion resisting

Brand:aa

Product detail:

We are a Chinese leading aluminum product manufacturer located in the capital of Henan Province, P.R. China. It takes 25 minutes to Zhengzhou International Airport from our company. The products we manufacturing include Pharmaceutical foil,packaging foil,Aluminum foil, aluminum plates,
aluminum bars, aluminum plates and aluminum strips. Product quality was perfectly guaranteed by our long-term experience in this line.
Established in 2009 as one of the best Private joint-stock enterprises, our company is located in the "Chinese Top one aluminium product manufacturing base" - Huiguo Town, Henan Province, P.R. China.

Aluminium sheet:

1000 Aluminum Sheet Specifications
alloy:1050,1060,1070,1100,1200,etc.
temper:O~H112
width:500mm-1500mm
SGS & ISO
Length:according to your requirements
1000 Aluminum Sheet Features
This series aluminum sheet, also called pure aluminum sheet, has the highest aluminum content among all the series produced by Huawei. Its aluminum content can be more than 99.00%.
As no other techniques are involved in the production, the production procedure is single and the price is cheap. It is a commonly used aluminum sheet in conventional industries.
The last two numbers in the serial number are used to determine the lowest aluminum content of this series. For example, in the 1050 series, the last two numbers are 50 and according to the corresponding international standard, the aluminum content has to reach 99.5% or more. In GB/T3880-2006, the technical standard of aluminum alloy in China, 1050 series also means the aluminum content has to reach 99.5%. 

1000 Aluminun sheet

Type	Alloy	Temper	Thickness		Width	Application
sheet	1050	O, H12, H14, H16, H18	0.3-0.5mm 0.5-1.0mm 1.0-5.0mm		400-700mm  700-1600mm  >1600mm	Conducors,hoses,,marine accessories.
	1060					Chemical and marine equipment
	1070					Capacitor ventliation system compents
	1100					Reflective devices,pipe,storage,Etc.
Other Products		Aluminum plate		3xxx,5xxx,6xxx,			Diverse temper
		Aluminum tape		1xxx,3xxx,5xxx,6xxx,
		Aluminum coils		1xxx,3xxx,5xxx,6xxx,
		Aluminum foil		8011			O

1100 Aluminum Sheet Low strength aluminum alloy has excellent corrosion resistance and satisfactory anodizing and conversion coating finishing characteristics. It is unmatched by any other commercial aluminum alloy in workability. Readily to welding, brazing, and soldering. Machinability is poor and tends to be "gummy". Non-heat treatable. Typical

As a China-based 1000 aluminum sheet manufacturer and supplier, we at Huawei also produce aluminium slit coil, aluminum strip, coated aluminum coil, aluminum plate, anodising aluminum sheet, embossed aluminum sheet, etc. 

3000 Aluminum Sheet 

1. Alloy:3003, 3004, 3005, 3105
2. Temper: H14, H16, H18, H22, H24, H26, O
3. Thickness(mm):0.25-10 
4. Width(mm):800-2200
5. This series aluminum sheet is anticorrosive and its production technology is good.
6. The main ingredient in it is manganese element and the content is between 1.0% and 1.5%.

3000 Aluminum Sheet Applications

As a result of its good property in anti-corrosion, this series aluminum sheet is commonly used in moist environments like air conditioners, refrigerators, at the bottom of cars, etc.

3000 series aluminum sheet is approx 20% stronger than the 1000 series, has great workability and may be deep drawn, spun, welded or brazed. The 3000series aluminum sheet is widely used for general purposes. The Alloy are including the AA3003, AA3004, AA3005, AA3102, AA3105, Temper O, H14, H18, H24, H26, H111, H112, F, From thickness 0.2mm-350mm, width 500mm-2300mm, length 500mm-110000mm. With Plain, five bar, stucco, diamond, or mirror surface process, Or coated with PE, PVDF, BRUSH etc. There is (CC) cold rolling and (DC) hot rolling Line.

3003 Aluminum Sheet Approx. 20% higher strength than the 1100 series, but retaining an excellent workability rating. May show some slight discoloration when anodized, but reacts well to mechanical and organic finishings. 3003 is easily welded and brazed, but solder is limited to the torch method. Like 1100, tends to be "gummy" when machined. Non-heat treatable.Typical applications include food and chemical equipment, appliance components, truck and trailer roofing, heat exchangers, and lawn furniture components.

5000 Aluminum Sheet 

1. The main ingredient of this series aluminum sheet is magnesium element and the content is between 3% and 5%. It is also called aluminum magnesium alloy.
2. With its low density, it features high tensile strength and elongation.
3. This series aluminum sheet is a commonly used and mature series in China.

5000 Aluminum Sheet Specifications

1. Sheets thickness: 0.15-2.0mm
2. Plate thickness: 2.0mm-250mm
3. Temper: Soft and Variety Hard temper (O-H116) (T2-T6)
4. Cusotom requirements are acceptable

5000 Aluminum Sheet Applications

1. With the same area of other series, the weight of this aluminum sheet is lighter. As a result, it is used in aviation, such as in the fuel tanks in airplanes.
2. It is widely used in conventional industries.
3. This aluminum sheet can be used in continuously casting and rolling. It can be hot rolled. As a result, it can be used in oxidation and deep processing.

5083 Aluminum Sheet

With excellent corrosion resistance and weldability, together with high strength, this alloy was designed for welded structures requiring maximum joint strength and efficiency. Can be anodized for increased corrosion resistance, but does not lend itself to decorative applications. Not meant to be a machining alloy, but can be machined fairly well with proper preparations. Because of its relatively high magnesium content, the workability rating would only be fair. Non-heat treatable. Typical applications include large marine craft, containers, railroad cars, structurals and elevator cars. 

5454 Aluminum Sheet

Excellent corrosion resistance and, unlike the other magnesium alloys, it maintains that rating when functioning in the150-300 degrees F range where the others would be prone to stress corrosion. Not a decorative alloy but well adapted to the applied finishing processes. High strength, excellent weldability, fair formability, and poor machinability.Non-heat treatable. Typical applications include dump bodies, exhaust stacks, marine components, and chemical handling vessels.

Our Aluminium sheets products list including

1. Coil sheet, Mill finish aluminium sheet (MFP)
2. Color coated aluminium sheet
3. Checkered plate (TLP in nickname of , checker plate, Tread plate, diamond plate, chequer plate)
4. Mirror finish aluminium sheet (Mirror reflective aluminium sheet)
5. Anodised aluminium sheet (two side anodised, only silver color available.)
6. Stucco aluminium sheet (orange skin type, variations stucco type)
7. CTP base board
8. PS base board
9. CC Lids/cap plate

6000 Aluminum Sheet 

1. Alloy:6xxx,6011, 6061, 6063
2. Thickness:0.2-150mm
3. Temper: 0-H112
4. Thickness(mm): 0.6-5.0mm
5. Width(mm): 100-1800mm
6. Certificate: ISO9001, MSDS, SGS

Features of 6000 Series Aluminum Sheet

1. It is a kind of aluminum sheet which can be forged with cold treatment. With this, it can be used in situations which have high demand in anti-corrosion and oxidation.
2. As a result of its good availability and its connector with super features, it is easily coated and has good processability.
3. Suitable for further processing of cladding wall and curtain wall

Applications of 6000 Series Aluminum Sheet

This series aluminum sheet can be used in processing airplane parts, camera parts, couplers, ship parts, hardware, electronic accessories and joints, valves and valve parts, etc. It can also be used in low tension weapons and connectors in airplane.

6061-T6 is one of the most commonly used 6000 series aluminum alloys. 6063 is an aluminum alloy, with magnesium and silicon as the alloying elements. It has generally good mechanical properties and is heat treatable and weldable. 

Factory & Equipment

Products & Packaing