titanium welding thread with mtc from top quality manufactory

Brand:aa

Product detail:

1>. Available Diameter, Type & Packing

Size (mm)

Dia 0.5

Dia 0.8

Dia 1.0

Dia 1.2

Dia 1.6

Dia 2.0

Dia 2.4

Dia 2.5

Dia 3.0

Dia 3.2

Dia 4.0

Dia 4.8

Dia 5.0

Size (inch)

0.020''

0.031"

0.039"

0.047"

0.062"

0.079"

0.093"

0.098'

0.12"

0.125"

0.16''

0.19''

0.20''

Straight

OK

OK

OK

OK

OK

OK

OK

OK

OK

Spool

OK

OK

OK

OK

OK

Coil

OK

OK

OK

OK

OK

OK

OK

OK

OK

2>.Our welding wire picture for your ref.

3>.Guide to choise of filler metal for general purpose titanium welding

ASTM Base Metal Grade		Base metal				Normal composition		Recommended Filler Metal		Comments
		UTS(min.) ksi[Mpa]		YS(min.) ksi[Mpa]
Grade 1		35[240]		20[138]		Unalloyed  Ti CP1		ERTi-1		-
Grade 2		50[345]		40[275]		Unalloyed Ti CP2		ERTi-2		ERTI-1 is no longer recommended for Grade 2 in structural application
Grade 4		80[550]		70[483]		Unalloyed Ti CP4		ERTi-4		-
Grade 5		130[895]		120[828]		Ti 6AL-4V		ERTi-5		-
Grade 7		50[345]		40[275]		Ti 0.15Pd		ERTi-7		-

4>. Chemical compostion requirements

AWS	CHEMICAL SPECIFICATIONS
AWS A5.16	UNS	C	O		N	H	I	Al	V	Pd
	Number
ERTi 1	R50100	0.03	0.03-0.10		0.012	0.005	0.08	-	-	-
ERTi 2	R50120	0.03	0.08-0.16		0.015	0.008	0.12	-	-	-
ERTi 4	R50130	0.03	0.08-0.32		0.025	0.008	0.25	-	-	-
ERTi 5	R56400	0.05	0.12-0.20		0.03	0.015	0.22	5.5-6.7	3.5-4.5	-
ERTi 7	R52401	0.03	0.08-0.16		0.015	0.008	0.12	-	-	0.12-0.25

5>. LiHua non-ferrous metals group ISO:

 

ERTI-1: Grade 1 is the lowest strength unalloyed (or Commercially Pure-CP)grade. Grade 1 is used in applications where ductility is paramount,such as explosive cladding, loose linings, expanded metal, and deep drawing applications. It is also used in electrolytic applications like coated anode substrates for production of chlorine and sodium chlorate.

 

ERTI-2: Grade 2 is the "workhorse"of the industrial corrosion market and most common unalloyed(or commercially Pure-CP)grade. Grade 2 is generally the most readily available in all product forms and has the lowest cost . It is used for process equirpment like pressure vessels ,columns ,tanks,heat exchangers,shafts,blowers and fans,conderser tubing ,valves,fittings and pipe.

 

ERTI-4: Grade 4 is the highest strenth unalloyed(or Commerically Pure-CP) grade.Grade 4 is rarely used I corrosion service ,but have beeen used(under AMS Specifications)in aircraft components where its higher strength can reduce the weight of components like bulk-heads and firewalls.

 

ERTI-5: Grade 5(Ti6al4v),commononly called"6-4",is the most common and widerly used alloy grade due to its relatively low cost and good availability.It is a UTS of 130,000psi[895MPa]minimum,good weld-ability, and can be heat treated to a higher strength or toughness.Grade 5 is used in aircraft components such as landing gear,wing spars,and compressor blades,it is corrosion resistance is generally comparable to Grade 2 and its often used in corrosion serive where higher strength is required ,particularty in shafts,high strength bolting,and keys.

 

ERTI-7: Grade 7 has the same mechanical properties as Grade 2.The 0.12 wt%palladium addition improves corrosion performance under mildly reducing conditions or where crevice or under-deposit corrosion is a problem, ERTi-7 can be considered for welding Grade 2 or 16 where improved corrosion performance is desired.

 

Thanks for your interesting of our product and why don't discuss our business in details soon ? 

Skype:myrnazhang9807