Brand:aa
Product detail:
custom 3d rubber fridge magnets
Flexible Rubber magnets are made by mixing Ferrite or Neodymium magnet powders with synthetic or plastic rubber (CPE,NBR etc)binders. Flexible (Rubber) magnets are made by rolling (calendaring) or extrusion methods.
Thickness range:0.4mm-5mm
Standard tolerance: Length/Width:±1.5mm.
Thickness:according with the cusomer’s requirement.
Higher tolerance is available upon request.
Magnetizing: Standard multi-pole pitch: 2mm,2.5mm,3mm,4mm,5mm.
Various coating on the magnetic sheets are available, such as PVC,UV oil,etc.
We offer two grades of flexible magnets : Isotropic and An-Isotropic.An-Isotropic is stronger and more costly.
Common Applications
Flexible magnets are used for the following applications:
• Displays
• Printing
• Toys and games
• Arts and crafts
• Warehouse labels
• Paint masking
• Window and door seals
High Energy Flexible Magnets are applied on Micro-Motors, Sensors, Latches, Magnetic Assemblies, Electronics, Appliances, Seals,etc .
Tensile strength(Mpa) | Torsibility | Hardness(SHORE A) | Blending performace | Density | ||||||||
5-10 | No crack with 180 torsion | 93-97Hs(A) | 100-140 | 3.6-3.8 | ||||||||
custom 3d rubber fridge magnets
Motor strip is the anisotropic bonded magnet with enjoying characteristics of satisfactory magnetic property, mechanical property, chemical corrosion resisting property, strict size precision and good consistency. It is widely used as stator and rotor in motor of TV antenna, CPU cooler, CD/VCD player and tape rewind, etc.
isotopic rubber magnet sheet with colored vinyl
Material | Max Operating Temperature | Max Magnetic Energy Product | Resistance to Demagnetization | |||||||
Neodymium Iron Boron | 200°C | 52 MGOe | Very High | |||||||
Samarium Cobalt | 300°C - 350°C | 32 MGOe | Very High | |||||||
Alnico | 150°C | 10 MGOe | Low | |||||||
Bonded NdFeB | 150°C | 10 MGOe | High | |||||||
Hard Ferrite | 300°C | 4 MGOe | Moderate |