fibreglass woven roving for frp

Brand:aa

Product detail:

fibreglass woven roving for frp   

Well-distributed, even tensile strength, good vertical performance.
Fast impregnation, good moulding property, easily removing air bubbles.

 

High mechanical strength, less strength loss in wet condition.

Products Introduction and Application

E-Glass woven roving is plain, biaxial fiberglass fabric that weaved with E-Glass direct roving. E-Glass Woven roving is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. It’s widely used in hand lay up, mold press, GRP forming process and robot processes to manufacture boats, vessels, plane, automobile parts, panels, storage tanks etc.

Products Features and Advantages

Well-distributed, even tensile strength, good vertical performance.
Fast impregnation, good moulding property, easily removing air bubbles.

High mechanical strength, less strength loss in wet condition.

 

Key Technical Data

Specs	Unit Mass (g/m2)	Breaking Strength≥N/2.5cm		Density			Weave	Roll Length (m)	Width (mm)
		Warp	Weft	Warp	Weft
EWR400	400	1480	1380	3.5		3.3	plain	100-200	300-4000
EWR600	600	1900	1800	3.0		2.5	plain	100-200	300-4000
EWR800	800	2600	2350	2.0		2.0	plain	100-200	300-4000

Packing Style

It is rolled on a paper core with a diameter of 100mm, then packed into a polyethylene bag, then outside packed into a separate cardboard box. Finally, the product can be ether shipped with cardboard box only or with pallet.

Storage

In dry and cool places. The best condition is with temperature between 15°C and 35°C, with a relative humidity between 30% -70%. Before use, please keep it in original package.

  

fibreglass Sample is free,freight is collect

                                                                fibreglass woven roving for frp