Click for original picture
Legal status confirmed
Brand:aa
Product detail:
LUGB-Series Vortex Flow Meter
Size of flow meter
Chart of flow meter
- Feature
- Piezocrystal inbuilt in bluff body to avoid fluid turbulance caused by external type, no zero drift and high reliability
- No moving parts, high durability
- Convenient installation and maintenance
- Sensor not connect with the measured fluids directly, stable performance and long service life
- Output pulse signal is directly proportional to flow rate, high accuracy and no zero drift
- Wide measuring range, turndown ratio 10:1
- Low pressure loss, low cost
- Frequency output not affected by the fluid change in physical character and composition, meter factor (K) only considers shape and dimension of eddies. Measurement of volumetric flow can get compensation once it needs. Then no re-calibration meter factor needed if damaged parts be exchanged
- Wide application for air, gas.
- Technical parameters
Inside nominal diameter (mm) | 25,40,50,65,80,100,125,150,200,250,300,(300~1000 plug-in) |
Nominal pressure (MPa) | DN25-DN200 4.0(>4.0 order by agreement),DN250-DN300 1.6(>1.6 order by agreement) |
Medium temperature (°C) | Piezoelectric type:-40~260,-40~320; Capacitance: -40~300, -40~400,-40~450(order by agreement) |
Noumenon | 1Cr18Ni9Ti,(order by agreement if need other material) |
Vibrating acceleration | Piezoelectric type:0.2g Capacitance:1.0~2.0g |
Range | ±1%R,±1.5%R,±1FS;plug-in:±2.5%R,±2.5%FS |
Range degree | 1:6~1:30 |
Service voltage | Sensor: +12V DC,+24V DC; transmitter: +12V DC, +24V DC; battery supply feed: 3.6V battery |
Output signal | Square wave pulse (non- battery supply feed): high level≥5V, low level≤1V; current: 4~20mA |
Loss coefficient | JB/T9249 Cd≤2.4 |
Anti-explosion sign | Ben-an type: Exd IIia CT2-T5 anti-explosion type: Exd IICT2-T5 |
Protection grade | Ordinary type IP65 dive type IP68 |
Environment condition | Tem-20°C~55°C,relative humidity 5%~90%, atm press 86~106kPa |
Medium | Gas, liquid, vapor |
Transmission range | Three-wire system flow sensor:≤300m,electric sign of two-wire system transmitter (4~20mA): load resistance≤750Ω |
