DDM100SCR3 Single-phase Three-wire Electronic DIN-rail Active Energy Meter with RS-485 Communication

Brand:aa

Product detail:

DDM100SCR3 Single-phase Three-wire Electronic DIN-rail Active Energy Meter with RS-485 Communication

 

APPLICATION

 

DDM100SCR3 single phase three wire DIN-rail active energy meter,with RS485 communication.

The meter is used to measure 50Hz or 60Hz active energy consumption from single phase three wire AC electricity net.

The features of small size and DIN-rail mounting make it suitable for installation in distribution boards and small standard enclosures.

The meter is widely used in the office buildings, shopping malls, residences, airports and metro,etc.

The meter has RS485 communication module, which is convenient to meter-reading.

 

FUNCTIONS AND FEATURES

 

♦35mm standard DIN rail installation or front board setting, complying with standard DIN EN50022,or front board setting (mounting holes center distance 63 mm), users can choose any one by themselves.

♦Seven poles width.

♦LCD 6+1 digits display (999999.1kWh).May select 5+2 digits display (Please specified when ordering).It can be arbitrary set by users from port of RS485 communication.

♦Standard configuration one port of pulse output passive (polarity),may select increase a distant port of pulse output passive (nonpolarity).Complying with standard IEC62053-31 and DIN43864.

♦LED instructions power supply state, signal of energy impulse and communication state.

♦There is a port of RS485 communication. Standard configuration communication agreement complying with standard DL/T645-1997, can also choose any other communication agreement.

♦Standard configuration don’t detection direction of the flow of load current.May select automatic detection the direction of the flow of load current. And instructions by an individual LED.

♦Single direction measures single phase three wire active power consumption.It is nothing with direction of the flow of load current,

complying with standard IEC62053-21,IEC62052-11

♦Directly connect operation or through CT or PT & CT.

♦Standard configuration short terminal cover,which is helpful to reduce installation space and make it convenient to install. May select extended terminal cover, which is for protecting the safety of using electricity.

OPTIONAL FUNCTIONS

♦Standard configuration LCD display without backlighting,may select with white backlighting,and there is maintenance-free battery, used for display when the power cut off.

♦Multi-tariff is available (optional TOU or step tariff);