ST-1600MX-1 100*100*100mm Hot Selling Translucent Dental Zirconia Furnace

Brand:aa

Product detail:

 ST-1600MX-1 100*100*100mm Hot Selling Translucent Dental Zirconia Furnace :

Designed as table model with SiC heating rods, this model offers numerous advantages when sintering zirconia. The large heating chamber and fast heating-up times make this model a good selection for the CAD/CAM processing of zirconia. The furnace controller can be freely programmed for the individual sintering of the zirconia material. The model ST-1700MX-1 is moreover designed for connection to the single-phase mains supply. When using liquid shading colors it must be ensured that the charge has been fully dried before starting the sintering process.

• Tmax 1600  °C
• Working temperature 1500  °C, increased wear and tear of heating elements must be expected in case of working at higher temperatures
• Single-phase connection
• High-quality fiber material, selected for the working temperature
• Housing made of sheets of textured stainless steel
• Dual shell housing for low external temperatures and high stability
• Adjustable air inlet integrated in the door
• Switching system with solid-state-relays, power tuned to the SiC rods
• Easy replacement of heating rods

 

Product name and model	ST-1600MX-1 Box Type Muffle Furnace
Chamber size(WxHxD)	100x100x100mm
Chamber insulation materials	lightweight aluminum oxide Ceramic fiber
Maximum Temperature	1600°C (Working time Not more than 3 hours.)
Working Temperature	400-1500°C (justierbar, continuously Working)
Temperature controller way	Based on the microprocessor 30 segments programmable and PID auto control
Heating Rate	1--15°C/min (justierbar,)
Temperature accuracy	+/-1°C
Sensor of measuring  Temperature	B type thermocouple
Heating elements	U Type MoSi2 Rod
Furnace shell structure	Double ventilation cooling structure
Cooling way	Fan cooling
Temperature display mode	Four Figure Liquid Crystal Display
Working power	AC 1-phase, 110-240 V 50/60Hz (User Choose any)
Rated power	1.5KW

 

 

Standad zirconia furnace produced by Zhengzhou Sutong , Of course ,non standard size can also be available  

model	chamber size (W×H×D mm)	Rated power	Work power	Furnace door open way
ST-1700MX-M	100x100x100	1.5KW	AC 1-phase 110-240V 50/60Hz	front to right open or left open front to Up open or down open
ST-1700MX- 1	150x150x150	3.5KW
ST-1700MX- 2	150x150x200	4.5KW		front to right open or down open
ST-1700MX- 3	200x200x200	6.0KW		front to right open or down open
ST-1700MX-4	200x200x300	7.5KW		front to right open or left open
ST-1700MX- 5	250x250x300	11KW		front to right open or left open
ST-1700MX- 6	300x300x400	17KW	AC 3-phase 120-440V 50/60Hz	front to right open or left open
ST-1700MX- 7	350x350x400	20KW		front to right open or left open
ST-1700MX- 8	400x400x400	24KW		front to right open or left open
ST-1700MX- 9	500x500x500	36KW		front to right open or left open
ST-1700MX- 10	600x600x600	54KW		front to right open or left open

 

 

 

Additional equipment

 

• Over-temperature limiter with manual reset for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
• Square saggar for charging of up to three layers
• Lid for top saggar