150W 36V 4.5A high efficiency Constant current waterproof 150w driver led (SS-150R-36) power supply

Brand:aa

Product detail:

 

     

                

           150W 36V 4.5A high efficiency Constant current waterproof 150w driver led (SS-150R-36) power supply LED

Item No.	SS-150R-36 led driver
Rated AC Input Range	100---240Vac/50---60Hz
AC Input Range	90---277Vac/50---60Hz
Input AC Current	2.2Amax. @ 100---277Vac input & Full load
Input inrush current(cold start)	≤20A at 110Vac ≤40A at 230Vac
Power factor	≥0.95(at full load,115Vac/230Vac)
Efficiency	93% Typical (Input 230Vac &Output Full load)
No Load Output Voltage	38V ±3%
Full Load Output Voltage	24---36V
Full Load Output Current	4500mA max
Output Current Tolerance	±3%
Ripple & Noise	540mVmax
Output Power	162W
Short Circuit Power	≤5W
Power type	Constant Current
Standard Certificate	UL/CUL/TUV/CQC/SAA/CE
Turn - on Delay Time	2.0S max. @ 230 Vac input & full load
Hold-up Time ·	10mS min. @ full load & 230Vac/50Hz input turn off at worst case
Rise Time	300mS max. @ full load
Fall Time	50mS max. @ full load
Output Overshoot / Undershoot	10% max. When the power on or off
Size	L222.2mm*W69mm*H42.2mm
Weight	about 1100 gram
MOQ	100 Pcs
Protected functions	Short circuit/Over voltage/Over current/Over temperature/Over load
Working time	>50,000 hours
Housing	Aluminum Case
Quality	High reliability and stability
Warranty	3 years warranty
Strong point	High reliability and Low price
Packaging Drawing	1. Standard Carton
	2.Outside Carton Size: L450*W342*H230mm
	3.Environment Request: Passed RoHS
	4.Exterior Appearance Request: no damage, no dirt, no edges incision
	5.Each box 16 pcs

 

 

Model Listing:

 

   

Model	Output voltage	Output Current	Output Current Tolerance	Ripple & Noise	Output Power	Short-Circuit Power	Certificate
SS-150R-36	24---36V	4500mA max	±3%	540mVmax	162W	≤5W	UL/CUL/TUV/CQC/SAA/CE
SS-150R-36A	24---36V	4200mA max	±3%	540mVmax	151W	≤5W	TUV /SAA/CE
SS-150R-36B	24---36V	3900mA max	±3%	540mVmax	140W	≤5W	TUV /SAA/CE
SS-150R-50	35---50V	3000mA max	±3%	750mVmax	150W	≤5W	UL/CUL/TUV/CQC/SAA/CE
SS-150R-50A	35---50V	2700mA max	±3%	750mVmax	135W	≤5W	TUV /SAA/CE

 

  

                                                                                                                                                                                                                                                                                                                                        

 Applications:

 

1.  LED Signage / Channel Letter
2.  LED Architectural Lighting
3. LED Commercial Industrial Lighting
4. LED General Luminaires

Features:

1.    Universal AC Input 

2.    Fantastic Thermal Performance

3.   100% full load Burn-in

4.   Convection Cooled in aluminum Shell

5.   Good energy-saving and high efficiency

6.   Built for Outdoor / Indoor, Wet / Dry location

7.   Active Power Factor Correction (PFC) Capability 

8.   Built-in Protection Circuitry 

9.   Long MTBF for at least 30,000 hours 

10.  We use first-line parts like TDK transformer core , Fujitsu Mosfet tubes, Rubycon Capacitors

11.  Our Certifications are IP67, SAA, FCC, RoHS, CE, CQC, TUV, UL,etc.

12.  ODM and OEM are warmly welcomed.

 

Advantages:

1. Products has been qualified with certification of CE UL CQC TUV and test of Safety
2. Heat-resistant and naturally heat radiated pure PC housing(if below 50W and heat-resistance with 120 Degree, this assures product insulation class and safety; newly aluminum housing (with 85% content of aluminum, if above 50w as well.
3. Major chips are made of ST(Italian/French semiconductor), Infineon and Onsemi etc.
4. Mos tube: leading brands such as ST,Toshiba and Fuji etc.
5. Electrolytic capacitor is made in Japan or Taiwan, rubycon etc.
6. Pouring sealant for waterproof power supply is made in Dow Corning(the USA).
7. All power supplies are made under environmental - protection procedures and ful complaince to RoHS.
8. Power supplies are made in hi-precise techniques under short-cut process.
9. Power supplies must be qualified with full-load temperature-constant and aging-resistant test before shipment.
10. All products must be tested under high/low-temperature tests at high/ low temperature test cabinet-(-40 - 60 degree) for further assurance for product relialibity
11. Supreme Lightning-resistant design and its test ,lightning resistant design shall be done under above 6000v.
12. Efficiency and power elements should meet international requirements.
13. Perfect protection funtions, such as over-voltage protection, over-current protection, short-circuit protection and over-load protection.

 

PROTECTION FUNCTION:

1. Output Over- Voltage Protection : When the output voltage is over 10% the product is protected such as hiccup or when it is at the highest point of output voltage the product would not be hurter when the fault is excluded or is start
   working again the power supply is working normally .
2. Output Over-Output Current Protection : When the output currents is over 130%, Return to normal status when Output Limit current to get right.
3. Short Circuit Protection : The input power shall decrease when the output rail short, the power supply shall no damage, and shall be self-recovery when the fault condition is removed.
4. Over Temperature Protection :  When the shell temperature of 100 ° C + 10 ° C, the protection of the power supply into the state, when the shell temperature below 85 ° C, power supply automatic recovery.

Environment requirement:

1. Operating Temperature: -35°C to +60°C
2. Storage Temperature: -40°C to +85°C
3.  Relative Operation Humidity: 10%RH to 100%RH
4. Relative Storage Humidity: 5%RH to 100%RH
5. Cooling Method: Cooling by free air convection
6. Vibration: 1.0mm, 10 –25Hz, 15 minutes per cycle for each axis (X, Y, Z)
7. Height Above Sea Level: The power supply can normal operate at -65~4000 meter. 

Reliability Requirements:

1. Burn-in: The power supply shall be burn-in for 8 hours at 40°C±5°C(The detail is at suggest Test Standard).
2. MTBF Estimation: The MTBF shall be at least 30,000hours at 50°C, 100% load and nor. input condition.

 

EMI/EMS Standards:

1. EN55015:2006+A1:2007+A2:2009
2. EN61547:2009
3. EN61000-3-2:2006+A1:2009+A2:2009
4. EN61000-3-3:2008

Safety Standards:

1. Dielectric Strength(Hi-pot):

         1.1  Primary to Secondary: 3000Vac/5mA Max/60 seconds (3seconds for production).

         1.2  Primary to Earth: 500Vac 5mAMax / 60second (3second for production), have installed lightning protection tube.

         1.3  Primary to Earth: 1500Vac 5mAMax / 60second (3second for production), haven’t installed lightning protection tube.

 

 

     2. Leakage Current: 3.5 mA max.

 

     3. Insulation Resistance: 10MΩ min. at primary to secondary adds 500Vdc test voltage.

 

Regulatory Standards:

1. CE: Europe EN61347-1:2008+A1:2011, EN61347-2-13:2006
2. TUV: Europe EN61347-1:2008+A1:2011, EN61347-2-13:2006
3. UL /CUL: North American UL8750
4. CQC : China GB17625-1 GB7743

 

Our services: 

1. Your inquiry related to our products or prices will be replied in 24hrs.
2. We experienced staffs to answer all your enquires in fluent English.
3. OEM&ODM, any your customized led drivers we can help you to design and put into product.
4. Distributoership are offered for your unique design and some our current models.
5. Protection of your sales area, ideas of design and all your private information.

6. If product quality problems occur within the warranty period, free replacement of the same type of product or repair bad and faulty products.

Wire Specification: 

1. AC input line: (CQC/TUV certificate)H05RN-F 60245IEC 57(YZW)3G1.0m2 -35°C to+60°C Yellow-green ,
   brown , blue three - line combinations ,black skin, tin 5 mm, exposed: 450 mm;(UL certificate )SJTW
   3*18AWG VW-1 105°C 300Vgreen , black , white, three - line combinations ,black skin, tin 5 mm,
   exposed: 450 mm
2.  DC output line:  (CQC/TUV certificate)H05RN-F 60245IEC 57(YZW) 2G1.0m2 -35°C to+60°C brown ,
   blue two - line combinations ,black skin, tin 5 mm, exposed: 450 mm;(UL certificate)SJTW 2*18AWG VW-1
   105°C 300V black , white, two - line combinations ,black skin, tin 5 mm, exposed: 450 mm.

Trade terms: 

 

1. Payment: T/T , 30% deposits before production, 70% balance to be paid before shipment

2. Production lead time : 2-15 days upon receipt of deposit

4. Shipping port: Shenzhen, Mainland China

5. Discounts are offered based on order quantities.

 

 Company Profile: 

1. Shenzhen PRC high-tech enterprise
2. Capital assets of RMB 10 million
3. Year of establishment: 1999
4. Total factory area: 10,000 sqm
5. Automatic productin lines: 5
6. Average monthly output: 500,000 pieces
7. Full time employees: 500
8. Management staffs: 40, R & D staffs: 30, QC staffs: 15, production line : 5
9. With certifications such as: CE, RoHS,UL, CUL,TUV,FCC,GS,CB,CQC and SAA etc.
10. Qualified with ISO9001:2008 quality management certification.
11. Main products: LED power supply driver for LED lamp and light
12. Target market: European Union, East Europe, Middle East, etc
13. With over a decade of exporting experience, our monthly output reaches 500,000 units
14. We supply high quality LED driver products with good prices for you.
15. Flexible and fast delivery, bulk orders usually delivery within two weeks, General small batch orders can be arranged delivery within 3 days if have semi-finished products in stock;
16. Compare with MeanWell, we have the advantages of ODM, OEM, quality unchanged and have competitive price.
17. Strong R&D team, R&D team has more than 30 people.

 

Certificate: 

 

 

Workshop:

 

 

 

 

Please always remember we can produce custom-made products according to your needs.

 

 

                                               Welcome to your inquiry!