Click for original picture
Legal status confirmed
Brand:aa
Product detail:
CNC hydraulic press brake:
1. Equipped with DELEM CNC system made in Holland and other key parts such as
linear scale, hydraulic valve, servo motor are all importing products.
2. There are two linear scales installed on "C" plates on both sides, which is fixed on worktable to eliminate the effect ion of deflection when working. The linear scale will inspect the both end positions of ram (Y1, Y2) and send signal. After amplified by CNC amplifier, the signal will be fed back to computer. Then the computer will control the volume of oil, which is going to enter into cylinders. So the parallelism of ram and worktable could be controlled under ±0.01mm.
3. DELEM system has automatic testing and self-diagnosis functions. Also, Programming is simply composed of putting in sizes of plate to bend, dimensions of work piece and choosing tools. Then CNC system could calculate the bending force and position of back gauge and ram automatically. Also the ram penetrating and pressing time relay could be calculated.
4. Good quality electro-hydraulic proportional valve is adopted to ensure the synchronization of both cylinders as well good capacity to deal eccentric load.
5. The stroke of ram and back gauge are all controlled by CNC system with good precision.
6. Main sliding parts such as cylinders, piston rod, guide way, are all treated with wear-resistance.
7. Back gauge adopts rolling ball screw and rolling guide way, so the repeat positioning precision of X axis could reach ±0.1mm.
8. Full machine is guarded with safety guard and interlocker to protect the operator
from injured.
1 | Type | Hydraulic CNC electro-hydraulic synchro |
2 | Working force | 250 T |
3 | Length of table | 4000 mm |
4 | distance between frames | 3100 mm |
5 | Throat depth | 400 mm |
6 | Open height | 560 mm |
7 | Stroke/Strocks | 250 mm / 3 min-1 |
8 | Main motor | 15 kw |
9 | CNC system | Type: DELEM DA56 Delem Co., Netherlands 4 Axis(Y1,Y2,X,R) +Automatic mechanic compensation system |
10 | Tool | With 1 punching and 1 bottom die |
11 | Main Electric Elements in cabinet | Schneider or Siemens |
12 | Seal in the cylinders | NOK, made in Japan |
13 | Gross weight | 15500 kg |
14 | Packing size(mm) LxWxH | 4300x2200x3170 |
15 | Packing: | With plastic cover Transportation: 20’ OT x 1 |
