Intagrated Heat Pipe Pressure Solar System for Heating Water

Brand:aa

Product detail:

 

How integrated pressure solar system works:

 

Solar collector evacuated tubes collect and convert sunshine energy into thermal energy, which is transferred to the central heat pipes in the tubes through the aluminum fins bridging the tube inner surfaces and the heat pipes. The copper heat pipes have tiny amount of purified water sealed in them at depressurized condition. When heated, the water inside the heat pipes vaporizes at low temperature (about 30^oC). The vapor (steam) rises to the pipe tips inserted into the water contained in the tank. Vapor is cooled down and becomes condensate falling to the bottom of the pipes. By continuously circulating this way, heat is carried from outside to the water inside the tank.

 

 

 

 

Specification of  Integrated pressure solar system:

 

 

Model			JPH
Tank	Tank  Capacity		150L,180L,200L,240L,300L
	Inner Tank	Material	SUS304 or SUS316
		Thickness	1.2mm or 1.5mm
		Diameter	370mm
	OuterTank	Material	Colored Steel
		Thickness	0.4mm
		Diameter	480mm
	Insulation		Polyurethane foam
	Insulation Thickness		55 mm
	Insulation Density		40Kg/m
	Connections for inlet,		1/2”
	Connections for Outlet		3/4”
	Connection Seals		No-weld Technology
Heat      pipe      solar       collector	Collector Area		-
	Absorber Area		-
	Fin material		Aluminium alloy
	Fin length		1620mm
	Fin thickness		0.25mm
	Heat pipe tube material		copper
	Heat pipe number		15,18,20,24,30 pcs
	Vacuum	size	58*1800mm
		material	borosilicate glass
	tube	number	15,18,20,24,30 tubes
	Heat pipe condensor diameter		14mm
	Heat pipe condensor length		55mm
	Heat pipe condensor thickness		1.0mm
	Heat pipe body material		copper
	Heat pipe body thickness		0.6mm
	seal ring		silicate aluminium
	Warranty		5 years
Stand	Material		Powder Coated
			Galvanized steel
	Thickness		1.5mm
	Angle		30/38/ 45 degree

 

• Vacuum tube: Twin-glass with three target coating of ALN/AIN-SS/CU, 58X1800mm
• Heat pipe : length: 1.7m, thickness:0.6mm, TU1 copper
• Outer tank: Colored steel or stainless steel, thickness: 0.4mm
• Inner tank: stainless steel 304-2B or 316L, thickness: 1.2 mm to 2.0mm
• Installation angle: 20/30/38/45 degree
• Insulation layer: Polyurethane 55mm, density: 42Kg/m3
• Diameter of inner tank: 360mm; 
• Diameter of outer tank: 470mm;
• Distance for tube to tube: 75mm. 

 Pictures: