small swimming pool heater with CE,SAA/ air to water heating and cooling equipment,R410A, 8.5KW

Brand:aa

Product detail:

Air source Small Type Plastic and Galvanized panel swimming pool heater pump

heating and cooling equipment

 

 

 Daishiba Swimming Pool Heat Pump is one of the most economical systems to heat the swimming pool efficiently. 

 Using the free renewable energy from the air and the earth it delivers up to five times more energy in heating than a traditional heating system such as gas boiler or electric heater.

 So you will save 4/5 cost of the traditional heating.

 The unit is working at low running costs, no direct CO2 emissions and are able to be integrated with energy systems like solar and boiler.

 Daishiba pool heat pump lengthens your swimming season and gives you comfort at high level.

 You could enjoy swimming not only in summer, but also in spring, autumn and even winter time.

 
Multiple functions:
1) Cooling & heating function available: Axen heat pump could heat your pool as well as cool the pool.
2) Auto operation, Auto-restart, Auto defrost
3) Timer on/off: No human attendance is required
4) Wide ambient working condition: -5°C to 43°C. 

 

 

Ecological and economical heating:
By making use of the renewable energy in the outside air, it consumes much less energy with low carbon emission;
Use environment friendly advanced refrigerant R410a which has no effect on ozone

 

Titanium heat exchanger:
Advanced titanium heat exchanger guarantees long life span of heat pump free from corrosion and rust. By using Titanium heat exchanger Daishiba pool heat pump could be applied with all types of water treatment such as chlorinate, iodine, bromine and salt water.

Specification - Swimming Pool Heat Pump

 

TECHNICAL DATA		DSP-85HA
Heating Capacity	KW	8.5
Power Input(H/C)	KW	1.69
COP		5.02
Cooling capacity	KW	6.2
Power Input(H/C)	KW	1.73
EER		3.59
Power Supply	V/Ph/Hz	220~240/1/50
Water temperature range	°C	15~45
Refrigerant		R410A
Compressor	brand	TOSHIBA
Air to water heat exchanger		Titanium Heat Exchanger
Water flow rate	m3/h	3.0
Water connection	mm(inch)	50.8(2")
Dimensions (Net)	mm	1010x370x614
Dimensions (Packing)	mm	1085x390x722
Net weight/Gross weight	kg	70/78
Size of swimming pool	m3	<=26
Noise level	dB(A)	52
Container loading	20' GP (units)	96
	40' GP (units)	198
	40' HQ (units)	198

NOTES:
Capacities and power inputs based on the following conditions:  
-   Heating:  Outlet water temperature 27°c. Ambient air temperature 24°c(DB)/19°c(WB)
-   Cooling:  Outlet water temperature 27°c. Ambient air temperature 35°C (DB)/27°c(WB)

 

 

Primary Production and Test Machines  

PRODUCTION PROCESS of Swimming Pool HEAT PUMP

1. Base plates go online

2. Install compressors, condensers and evaporators

3. Assemble and weld copper pipes

4. Recharged with Nitrogen

5. Water-inspection (Check if exist in air leakage)

6. Discharge Nitrogen

7. Vacuum air-removed

8. Add refrigerant

9. Halogen inspection

10. Fix fan component

11. Install electrical control

12. Security checks (Insulation, Ground connection, Dielectric Strength test, Leakage)

13. Run commodity inspection (The noise of components and parts, Function, Timing, shutdown, current, Difference in temperature)

14. Stick nameplate and connection diagram

15. Document attached (Product Manuals, instructions)

16. Final inspection (Appearance parts)

17. Packing

18. Tape-out

 

 

DAISHIBA is a professional company engaged in sales, R&D and production of refrigeration and heating products. We have rich experience in refrigeration and heating for many years. By years’ growth our product line covers full range:

 

Multifunction air to water heat pump, All in one domestic hot water heat pump, Split domestic hot water heat pump, Commercial hot water heat pump, Swimming pool heat pump, Multifunction water source heat pump, Water to water heat pump, DC inverter water to air heat pump and EVI air to water heat pump.

 

We'd like to serve our customers by providing unique high end products and high quality service.