heat pipe seperated pressurized solar water heater

Brand:aa

Product detail:

Split Pressurized Solar Water Heater
Product Specification
Inner Tank:
Material: SUS304 2B food grade stainless steel
Outer tank:
Material: Colorful steel, stainless steel, galvanized steel
Color: White, silk grey or original steel color
Capacity of water tank (Liters):
100, 150, 200, 250, 300, 400, 500
as following :

	80L	100L	120L	150L	200L	250L	300L	400L	500L
Diameter of the inner tank  (mm)	φ365	φ365	φ365	¢440	¢440	¢440	¢480	¢600	¢600
Diameter of outer shell(mm)	¢470	¢470	¢470	¢540	¢540	¢540	¢600	¢700	¢700
Material  of the inner tank	SUS304stainless Steel
Thickness of the inner tank	1.2mm	1.2mm	1.2mm	1.2mm	1.2mm	1.2mm	1.2mm	2.0mm	2.0mm
Material of outer shell	Color Steel Plate(enamal white)
Thickness of Outer shell	0.31mm	0.31mm	0.31mm	0.41mm	0.41mm	0.41mm	0.45mm	0.45mm	0.45mm
Insulation material	High dense polyurethane foam
Insulation thickness	50mm	50mm	50mm	50mm	50mm	50mm	60mm	50mm	50mm
Installation size of water pipe	NPT3/4"
Rated heating power	1.5kw	1.5kw	1.5kw	2.0kw	2.0kw	2.0kw	3.0kw	3.0kw	3.0kw
Surface area heat   exchanger top(m2)	----	----	----	0.6	0.6	0.6	0.6	0.8	0.8
Upper coil (mm*mm*m)  (Diameter×Thickness×Lenght)	--	----	----	¢14×1.0×12	¢14×1.0×12	¢14×1.0×12	¢14×1.0×12	¢18×1.0×14	¢18×1.0×14
Surface area heat   exchanger top(m2)	0.6	0.6	0.6	0.7	0.7	0.7	0.7	1	1
Lower coil (mm*mm*m)  (Diameter×Thickness×Lenght)	¢14×1.0×12	¢14×1.0×12	¢14×1.0×12	¢14×1.0×14	¢14×1.0×14	¢14×1.0×16	¢14×1.0×16	¢18×1.0×18	¢18×1.0×18
working pressure	0.6Mpa
Test pressure	1.2Mpa
Overall dimension  (references)(mm)	¢470×900	¢470×1180	¢470×1380	¢470×1620	¢540×1530	¢540×1860	¢600×1880	¢700×1540	¢700×1880
Packing case  size (mm)	510×510×1010	510×510×1290	510×510×1490	510×510×1680	590×590×1590	590×590×1920	640×640×1940	760×760×1640	760×760×1960
Weight  (references) (KGS)	28	32	36	43	50	55	72	102	126