500 liters Pressurized Active Solar Hot Water Heater

Brand:aa

Product detail:

 

 

Jinyi Split Solar Hot Water Heater (With two coils)

 

 

How split solar hot water heater works:

 

 

JinYi split solar hot water heater system is an active system. It uses a solar workstation the fluid between heat pipe solar collector and pressurized water tank. Tank and solar collector are separate, solar collector could be installed on the roof or somewhere sunshine could shine on, while tank, solar workstation could be installed anywhere of the building. The piping between the main components is twin way pre-insulated solar hose. one coil system is suit for climates where there is risk of freezing. it is the simplest and the most typically and the least expensive active system. The system operates at standard line pressure. The system integrates easily with existing systems.

 

 

SPLIT SOLAR WATER HEATER SCHEMATIC DIAGRAM

 

 

The main components of (With two coils) Split solar system:

1) JINYI heat pipe solar collector.
2) Solar Workstation (Single pipeline pump station or Double pipeline pump station).
3) Relief check valve, T & P valve, Air vent valve
4) Pressurized water tank with two coils 

 

Specification of pressurized solar water heater:

 

 

Specification		JSH2-500-30
Solar water tank	1pc	500L, with electric heater for back up heating
ETC solar collector	2pcs	30tubes, with back stand or roof hooks
Pump station	1pc	Wilo RS15/6, SR868C9 controller, safety valve, manometer, etc.
Expansion vessel	1pc	24L, with wall mountings
Connection kits	1set	brass connectors
Auto air vent valve	1pc	1/2"
Solar hose	1set	3/4", twin pipe insulated flexible stainless steel pipe (optional)